How to replace the front disc brake pads on 2008 Chevrolet Express 3500?

Check the brake master cylinder reservoir fluid before beginning work. Drain fluid only when you have excess above the midway level. Lift your vehicle properly and take off the tire and wheel unit. Test the brake caliper movement before placing heavy mechanic wire or similar support to stop damaging the hydraulic brake hose. Unbolt the caliper from its bracket keeping the brake hydraulic hose connected. Afterward extract the brake pads from this mounting bracket and discard the anti-rattle clips. Test the caliper and examine the mounting bracket. Place new anti-rattle clips on the caliper mounting bracket inner studs first before installing new brake pads the same way they were taken out and reattaching the brake caliper. Replace the tire and wheel afterward you take off the safety stands and let the vehicle down. Press the brake pedal when engine is off for 2/3 of its length several times to allow brake caliper pistons and pads to engage their proper position. If possible turn on the engine while you push and release the brake pedal to 2/3 of its travel many times to seat the pistons and pads. Then refill brake fluid and perform a spinning process on the brake plates.

OEM 2008 Chevrolet Express 3500 Brake Pad

Disc Brake Pad Set

Select Vehicle by Model
Select Vehicle by VIN

Select Vehicle by Model

Make

Model

Year

Select Vehicle by VIN

For the most accurate results, select vehicle by your VIN (Vehicle Identification Number).

5 Brake Pads found

View related parts
2008 Chevrolet Express 3500 Brake Pads
Part Number: 84265875
$115.11 MSRP: $231.21
You Save: $116.10 (51%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Pad Kit, Brake; Disc Brake Hardware Kit; Rear Pads
- Position: Rear
- Replaces: 88983902
- Item Weight: 5.20 Pounds
- Item Dimensions: 9.1 x 4.2 x 4.2 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 84265875
- Warranty: This genuine part is guaranteed by GM's factory warranty.
More Info
Fits the following 2008 Chevrolet Express 3500 Submodels:
- Base, LS, LT | 4 Cyl 2.8 L DIESEL, 8 Cyl 4.8 L FLEX, 8 Cyl 4.8 L GAS, 8 Cyl 6.0 L CNG, 8 Cyl 6.0 L FLEX, 8 Cyl 6.0 L GAS, 8 Cyl 6.6 L DIESEL
View related parts
2008 Chevrolet Express 3500 Brake Pads, Front
Part Number: 19432941
$131.12 MSRP: $277.15
You Save: $146.03 (53%)
ADD TO CART
Product Specifications
- Other Name: Pad Kit, Front Disc Brake; Front Pads; Pad Kit, Brake
- Position: Front
- Replaces: 15886468, 18048600, 18044594, 88950732, 18026219, 19210706, 25924485, 88964201, 84292732
- Item Weight: 15.20 Pounds
- Condition: New
- SKU: 19432941
- Warranty: This genuine part is guaranteed by GM's factory warranty.
More Info
Fits the following 2008 Chevrolet Express 3500 Submodels:
- Base, LS, LT | 4 Cyl 2.8 L DIESEL, 8 Cyl 4.8 L FLEX, 8 Cyl 4.8 L GAS, 8 Cyl 6.0 L CNG, 8 Cyl 6.0 L FLEX, 8 Cyl 6.0 L GAS, 8 Cyl 6.6 L DIESEL
View related parts
2008 Chevrolet Express 3500 Brake Pads
Part Number: 84292733
Product Specifications
- Other Name: Pad Kit, Brake; Disc Brake Hardware Kit; Front Pads
- Position: Front
- Replaces: 18048032, 19210708, 25926349, 15886469
- Item Weight: 8.60 Pounds
- Item Dimensions: 9.3 x 5.1 x 3.1 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 84292733
- Warranty: This genuine part is guaranteed by GM's factory warranty.
More Info
Fits the following 2008 Chevrolet Express 3500 Submodels:
- Base, LS, LT | 4 Cyl 2.8 L DIESEL, 8 Cyl 4.8 L FLEX, 8 Cyl 4.8 L GAS, 8 Cyl 6.0 L CNG, 8 Cyl 6.0 L FLEX, 8 Cyl 6.0 L GAS, 8 Cyl 6.6 L DIESEL
View related parts
2008 Chevrolet Express 3500 Brake Pads, Front
Part Number: 18048101
Product Specifications
- Other Name: Pad Kit, Front Disc Brake; Disc Brake Hardware Kit; Rear Pads; Front Pads; Pad Kit, Brake
- Position: Front
- Item Weight: 5.90 Pounds
- Item Dimensions: 9.1 x 4.8 x 3.7 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 18048101
- Warranty: This genuine part is guaranteed by GM's factory warranty.
More Info
Fits the following 2008 Chevrolet Express 3500 Submodels:
- Base, LS, LT | 8 Cyl 4.8 L GAS, 8 Cyl 6.0 L CNG, 8 Cyl 6.0 L GAS, 8 Cyl 6.6 L DIESEL
View related parts
2008 Chevrolet Express 3500 Rear Pads
Part Number: 88982640
Product Specifications
- Other Name: Pad Kit, Brake; Disc Brake Hardware Kit; Brake Pads
- Position: Rear
- Item Weight: 5.10 Pounds
- Item Dimensions: 9.6 x 5.2 x 3.4 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 88982640
- Warranty: This genuine part is guaranteed by GM's factory warranty.
More Info
Fits the following 2008 Chevrolet Express 3500 Submodels:
- Base, LS, LT | 8 Cyl 4.8 L FLEX, 8 Cyl 4.8 L GAS, 8 Cyl 6.0 L CNG, 8 Cyl 6.0 L FLEX, 8 Cyl 6.0 L GAS, 8 Cyl 6.6 L DIESEL

2008 Chevrolet Express 3500 Brake Pad

With a comprehensive array of OEM 2008 Chevrolet Express 3500 Brake Pad, from fuel pumps to door handles, our website is a one-stop-shop for your needs. All our genuine 2008 Chevrolet Express 3500 Brake Pad are backed by the manufacturer's warranty and are offered at competitive prices in the market. Rest assured, you can shop with complete confidence.

2008 Chevrolet Express 3500 Brake Pad Parts Questions & Experts Answers

Q: How to replace the front disc brake pads on 2008 Chevrolet Express 3500?
A: Check the brake master cylinder reservoir fluid before beginning work. Drain fluid only when you have excess above the midway level. Lift your vehicle properly and take off the tire and wheel unit. Test the brake caliper movement before placing heavy mechanic wire or similar support to stop damaging the hydraulic brake hose. Unbolt the caliper from its bracket keeping the brake hydraulic hose connected. Afterward extract the brake pads from this mounting bracket and discard the anti-rattle clips. Test the caliper and examine the mounting bracket. Place new anti-rattle clips on the caliper mounting bracket inner studs first before installing new brake pads the same way they were taken out and reattaching the brake caliper. Replace the tire and wheel afterward you take off the safety stands and let the vehicle down. Press the brake pedal when engine is off for 2/3 of its length several times to allow brake caliper pistons and pads to engage their proper position. If possible turn on the engine while you push and release the brake pedal to 2/3 of its travel many times to seat the pistons and pads. Then refill brake fluid and perform a spinning process on the brake plates.