How to Service and Repair the Tie Rod End on 2008 Chevrolet HHR?

To replace the rack and pinion outer tie rod end, remove the tire/wheel at the front and loosen the inner tie rod nut. Use a puller to pull out the outer tie rod end, recording the number of rotations for reinstallation. Inspect and clean threads and put on new nuts and reassemble, adjusting the front toe.

OEM 2008 Chevrolet HHR Tie Rod End

Steering Rod End

Select Vehicle by Model
Select Vehicle by VIN

Select Vehicle by Model

Make

Model

Year

Select Vehicle by VIN

For the most accurate results, select vehicle by your VIN (Vehicle Identification Number).

1 Tie Rod End found

View related parts
2008 Chevrolet HHR Outer Tie Rod Part Number: 25956927
$59.40 MSRP: $101.13
You Save: $41.73 (42%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Rod Kit, Steering Tie Rod Outer; Steering Tie Rod End; Outer Tie Rod End; Tie Rod End
- Position: Outer
- Replaces: 15140337, 15220347
- Item Weight: 1.60 Pounds
- Item Dimensions: 7.0 x 6.9 x 6.8 inches
- Condition: New
- Fitment Type: Direct Replacement
- Require Quantity: 2
- SKU: 25956927
- Warranty: This genuine part is guaranteed by GM's factory warranty.
More Info
Fits the following 2008 Chevrolet HHR Submodels:
- LS, LS Panel, LT, LT Panel, SS Panel | 4 Cyl 2.0 L GAS, 4 Cyl 2.2 L FLEX, 4 Cyl 2.2 L GAS, 4 Cyl 2.4 L FLEX, 4 Cyl 2.4 L GAS

2008 Chevrolet HHR Tie Rod End

With a comprehensive array of OEM 2008 Chevrolet HHR Tie Rod End, from fuel pumps to door handles, our website is a one-stop-shop for your needs. All our genuine 2008 Chevrolet HHR Tie Rod End are backed by the manufacturer's warranty and are offered at competitive prices in the market. Rest assured, you can shop with complete confidence.

2008 Chevrolet HHR Tie Rod End Parts and Q&A

Q: How to Service and Repair the Tie Rod End on 2008 Chevrolet HHR?
A: To replace the rack and pinion outer tie rod end, remove the tire/wheel at the front and loosen the inner tie rod nut. Use a puller to pull out the outer tie rod end, recording the number of rotations for reinstallation. Inspect and clean threads and put on new nuts and reassemble, adjusting the front toe.