How to Replace a Front Wheel Bearing and Hub on 2008 Chevrolet Malibu?

Start by lifting and holding the vehicle. Disconnect the brake rotor while taking off the Wheel Speed Sensor electrical connector when installed plus its mounting bracket. Detach the wheel-bearing and hub from the wheel drive shaft then unscrew all wheel-bearing mounting bolts to remove the wheel-bearing assembly with its backing plate out of the Steering Knuckle. Place the backing plate and Wheel Bearing/hub assembly into the Steering Knuckle before securing both Wheel Bearing/hub mounting bolts at 115 n.m torque setting (85 lb ft). Connect the Wheel Speed Sensor power connections first then attach it to its anchoring point as needed. Place the brake rotor and then install wheel drive shaft components including bolt and washer. Lower the vehicle when the support system removes.

OEM 2008 Chevrolet Malibu Wheel Bearing

Hub Bearing

Select Vehicle by Model
Select Vehicle by VIN

Select Vehicle by Model

Make

Model

Year

Select Vehicle by VIN

For the most accurate results, select vehicle by your VIN (Vehicle Identification Number).

3 Wheel Bearings found

View related parts
2008 Chevrolet Malibu Hub & Bearing, Green Line, Front
Part Number: 19259807
$257.97 MSRP: $505.08
You Save: $247.11 (49%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Bearing Assembly, Front Wheel; Wheel Hub Repair Kit; Axle Bearing.
- Position: Front
- Replaces: 20907865, 19421350, 22842004, 20964319
- Item Weight: 8.60 Pounds
- Item Dimensions: 7.4 x 6.6 x 6.5 inches
- Condition: New
- Fitment Type: Direct Replacement
- Require Quantity: 2
- SKU: 19259807
- Warranty: This genuine part is guaranteed by GM's factory warranty.
More Info
Fits the following 2008 Chevrolet Malibu Submodels:
- LS, LT, LTZ | 4 Cyl 2.4 L FLEX, 4 Cyl 2.4 L GAS, 6 Cyl 3.5 L FLEX, 6 Cyl 3.5 L GAS, 6 Cyl 3.6 L GAS
View related parts
2008 Chevrolet Malibu Hub Assembly, Front
Part Number: 15793213
$68.21 MSRP: $310.63
You Save: $242.42 (79%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Bearing, Front Wheel; Wheel Hub Assembly; Disc Brake Hardware Kit; Wheel Hub Repair Kit; Axle Bearing.; Front Hub; Hub & Bearing; Bearing, Front Wheel Inner
- Position: Front
- Replaces: 22706967, 21995732
- Item Weight: 9.30 Pounds
- Item Dimensions: 7.4 x 7.0 x 8.7 inches
- Condition: New
- Fitment Type: Direct Replacement
- Require Quantity: 2
- SKU: 15793213
- Warranty: This genuine part is guaranteed by GM's factory warranty.
More Info
Fits the following 2008 Chevrolet Malibu Submodels:
- Base, Classic LS, Classic LT, Hybrid, LS, LT, LTZ, Maxx, Maxx LS, Maxx LT, Maxx LTZ, Maxx SS, SS | 4 Cyl 2.2 L GAS, 4 Cyl 2.4 L FULL HYBRID EV-GAS (FHEV), 6 Cyl 3.5 L GAS, 6 Cyl 3.9 L GAS
View related parts
2008 Chevrolet Malibu Hub Assembly, Rear
Part Number: 15798483
Product Specifications
- Other Name: Hub, Rear Wheel; Wheel Bearing and Hub Assembly; Wheel Bearing & Hub Assembly; Wheel Bearing; Axle Bearing; Wheel Hub; Rear Hub; Hub & Bearing; Hub & Bearing Assembly; Bearing, Rear Wheel
- Position: Rear
- Replaces: 10399802, 22721886
- Item Weight: 8.70 Pounds
- Item Dimensions: 7.1 x 7.0 x 9.0 inches
- Condition: New
- Fitment Type: Direct Replacement
- Require Quantity: 2
- SKU: 15798483
- Warranty: This genuine part is guaranteed by GM's factory warranty.
More Info
Fits the following 2008 Chevrolet Malibu Submodels:
- Base, Classic LS, Classic LT, Hybrid, LS, LT, LTZ, Maxx, Maxx LS, Maxx LT, Maxx LTZ, Maxx SS, SS | 4 Cyl 2.2 L GAS, 4 Cyl 2.4 L FLEX, 4 Cyl 2.4 L FULL HYBRID EV-GAS (FHEV), 4 Cyl 2.4 L GAS, 6 Cyl 3.5 L FLEX, 6 Cyl 3.5 L GAS, 6 Cyl 3.6 L GAS, 6 Cyl 3.9 L GAS

2008 Chevrolet Malibu Wheel Bearing

With a comprehensive array of OEM 2008 Chevrolet Malibu Wheel Bearing, from fuel pumps to door handles, our website is a one-stop-shop for your needs. All our genuine 2008 Chevrolet Malibu Wheel Bearing are backed by the manufacturer's warranty and are offered at competitive prices in the market. Rest assured, you can shop with complete confidence.

2008 Chevrolet Malibu Parts Questions & Experts Answers

Q: How to Replace a Front Wheel Bearing and Hub on 2008 Chevrolet Malibu?
A: Start by lifting and holding the vehicle. Disconnect the brake rotor while taking off the Wheel Speed Sensor electrical connector when installed plus its mounting bracket. Detach the wheel-bearing and hub from the wheel drive shaft then unscrew all wheel-bearing mounting bolts to remove the wheel-bearing assembly with its backing plate out of the Steering Knuckle. Place the backing plate and Wheel Bearing/hub assembly into the Steering Knuckle before securing both Wheel Bearing/hub mounting bolts at 115 n.m torque setting (85 lb ft). Connect the Wheel Speed Sensor power connections first then attach it to its anchoring point as needed. Place the brake rotor and then install wheel drive shaft components including bolt and washer. Lower the vehicle when the support system removes.