Other Name: Striker Assembly-Rear Side Door Upper Latch; Striker, Door Lock Striker
Position: Rear Upper Driver Side
Replaces: 15175220, 15952222
Item Weight: 0.60 Pounds
Item Dimensions: 4.3 x 3.2 x 2.2 inches
Condition: New
Fitment Type: Direct Replacement
SKU: 20832749
Warranty: This genuine part is guaranteed by GM's
factory warranty.
More Info
Fits the following 2008 Chevrolet Silverado 1500 Submodels:
LS, LT, LTZ, WT | 6 Cyl 4.3 L GAS, 8 Cyl 4.8 L FLEX, 8 Cyl 4.8 L GAS, 8 Cyl 5.3 L FLEX, 8 Cyl 5.3 L GAS, 8 Cyl 6.0 L GAS, 8 Cyl 6.2 L FLEX
2008 Chevrolet Silverado 1500 Door Striker
With a comprehensive array of OEM 2008 Chevrolet Silverado 1500 Door Striker, from fuel pumps to door handles, our website is a one-stop-shop for your needs. All our genuine 2008 Chevrolet Silverado 1500 Door Striker are backed by the manufacturer's warranty and are offered at competitive prices in the market. Rest assured, you can shop with complete confidence.
2008 Chevrolet Silverado 1500 Parts Questions & Experts Answers
Q: How to Replace the Rear Door Striker on an Extended Cab on 2008 Chevrolet Silverado 1500?
A: The first step to replace the Extended Cab rear door striker is to remove the upper trim door upper striker cover through straight downward pulling which releases its retainer clips. Proceed with removing the door upper striker bolts and spacer (in case of existence) before completing the removal of the door upper striker. Installation of the door upper striker should start by positioning this piece first and the spacer must be installed if necessary. Secure the door upper striker bolt while you should rotate the lower striker bolt to align its upper threaded hole. Install the upper trim door upper striker cover by examining retainer clips for damage first then push it upward into its locator holes.