How to replace the Bank 1 knock sensor on 2008 Chevrolet Uplander?

Before starting with the replacement of Bank 1 knock sensor you need to elevate and stabilize your vehicle. Move on to stripping the radiator air baffle. Separate the engine harness electrical connector from the knock sensor before using a wrench to remove bank 1 knock sensor . The new bank 1 knock sensor installation requires no thread sealant since the factory-applied coating on its threads enables proper detonation detection. Torque the sensor to 25 N.m (18 lb ft) and attach the engine harness electrical connector to the knock sensor. Reposition the radiator air baffle before lowering the vehicle.

OEM 2008 Chevrolet Uplander Knock Sensor

Engine Knock Sensor

Select Vehicle by Model
Select Vehicle by VIN

Select Vehicle by Model

Make

Model

Year

Select Vehicle by VIN

For the most accurate results, select vehicle by your VIN (Vehicle Identification Number).

1 Knock Sensor found

View related parts
2008 Chevrolet Uplander Knock Sensor
Part Number: 12623730
$13.47 MSRP: $25.30
You Save: $11.83 (47%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Sensor, Distributor (Also Knock Sensor); Ignition Knock (Detonation) Sensor
- Replaces: 12570125
- Item Weight: 0.50 Pounds
- Item Dimensions: 2.7 x 2.5 x 1.2 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 12623730
- Warranty: This genuine part is guaranteed by GM's factory warranty.
More Info
Fits the following 2008 Chevrolet Uplander Submodels:
- Base, LS, LT | 6 Cyl 3.5 L GAS, 6 Cyl 3.9 L FLEX, 6 Cyl 3.9 L GAS

2008 Chevrolet Uplander Knock Sensor

With a comprehensive array of OEM 2008 Chevrolet Uplander Knock Sensor, from fuel pumps to door handles, our website is a one-stop-shop for your needs. All our genuine 2008 Chevrolet Uplander Knock Sensor are backed by the manufacturer's warranty and are offered at competitive prices in the market. Rest assured, you can shop with complete confidence.

2008 Chevrolet Uplander Parts Questions & Experts Answers

Q: How to replace the Bank 1 knock sensor on 2008 Chevrolet Uplander?
A: Before starting with the replacement of Bank 1 knock sensor you need to elevate and stabilize your vehicle. Move on to stripping the radiator air baffle. Separate the engine harness electrical connector from the knock sensor before using a wrench to remove bank 1 knock sensor . The new bank 1 knock sensor installation requires no thread sealant since the factory-applied coating on its threads enables proper detonation detection. Torque the sensor to 25 N.m (18 lb ft) and attach the engine harness electrical connector to the knock sensor. Reposition the radiator air baffle before lowering the vehicle.

Related 2008 Chevrolet Uplander Parts

Alternate Year Models

2007 Chevrolet Uplander Knock Sensor