How to Replace the Rear Parking Brake Cable with a Solid Axle on 2008 Chevrolet Uplander?

The first step to switch a parking brake rear cable to a solid axle requires appropriate vehicle lifting and support while following these instructions. Tension relief for the park brake cable should occur at the equalizer positioned near the middle of the rear axle. To work on the right rear cable disconnect its end from the clip but to replace the left rear cable remove the equalizer nut from the equalizer stud that is part of this cable. Proceed with disconnecting the rear cable from the front cable then remove the rear wheel. Move on to detach both park brake cable and support bracket from the actuator lever after removing the cable from its bracket. Start by setting the park brake cable into the support bracket followed by attachment to the actuator lever. The installation process requires the rear wheel reinstallation followed by front and rear cables connection. Next step includes park brake adjustment before the vehicle's lowering procedure.

OEM 2008 Chevrolet Uplander Parking Brake Cable

Emergency Parking Brake Release Cable

Select Vehicle by Model
Select Vehicle by VIN

Select Vehicle by Model

Make

Model

Year

Select Vehicle by VIN

For the most accurate results, select vehicle by your VIN (Vehicle Identification Number).

3 Parking Brake Cables found

View related parts
2008 Chevrolet Uplander Front Cable
Part Number: 15235099
Product Specifications
- Other Name: Cable, Parking Brake; Brake Cable
- Position: Front
- Item Weight: 0.50 Pounds
- Item Dimensions: 4.1 x 11.2 x 11.2 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 15235099
- Warranty: This genuine part is guaranteed by GM's factory warranty.
More Info
Fits the following 2008 Chevrolet Uplander Submodels:
- Base, LS, LT | 6 Cyl 3.5 L GAS, 6 Cyl 3.9 L FLEX, 6 Cyl 3.9 L GAS
View related parts
2008 Chevrolet Uplander Rear Cable
Part Number: 15177263
Product Specifications
- Other Name: Cable, Parking Brake; Brake Cable
- Position: Rear
- Item Weight: 0.80 Pounds
- Item Dimensions: 11.6 x 11.1 x 3.8 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 15177263
- Warranty: This genuine part is guaranteed by GM's factory warranty.
More Info
Fits the following 2008 Chevrolet Uplander Submodels:
- Base, LS, LT | 6 Cyl 3.5 L GAS, 6 Cyl 3.9 L FLEX, 6 Cyl 3.9 L GAS
View related parts
2008 Chevrolet Uplander Rear Cable
Part Number: 15177262
Product Specifications
- Other Name: Cable, Parking Brake; Brake Cable
- Position: Rear
- Item Weight: 1.30 Pounds
- Item Dimensions: 4.1 x 11.3 x 11.3 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 15177262
- Warranty: This genuine part is guaranteed by GM's factory warranty.
More Info
Fits the following 2008 Chevrolet Uplander Submodels:
- Base, LS, LT | 6 Cyl 3.5 L GAS, 6 Cyl 3.9 L FLEX, 6 Cyl 3.9 L GAS

2008 Chevrolet Uplander Parking Brake Cable

With a comprehensive array of OEM 2008 Chevrolet Uplander Parking Brake Cable, from fuel pumps to door handles, our website is a one-stop-shop for your needs. All our genuine 2008 Chevrolet Uplander Parking Brake Cable are backed by the manufacturer's warranty and are offered at competitive prices in the market. Rest assured, you can shop with complete confidence.

2008 Chevrolet Uplander Parking Brake Cable Parts Questions & Experts Answers

Q: How to Replace the Rear Parking Brake Cable with a Solid Axle on 2008 Chevrolet Uplander?
A: The first step to switch a parking brake rear cable to a solid axle requires appropriate vehicle lifting and support while following these instructions. Tension relief for the park brake cable should occur at the equalizer positioned near the middle of the rear axle. To work on the right rear cable disconnect its end from the clip but to replace the left rear cable remove the equalizer nut from the equalizer stud that is part of this cable. Proceed with disconnecting the rear cable from the front cable then remove the rear wheel. Move on to detach both park brake cable and support bracket from the actuator lever after removing the cable from its bracket. Start by setting the park brake cable into the support bracket followed by attachment to the actuator lever. The installation process requires the rear wheel reinstallation followed by front and rear cables connection. Next step includes park brake adjustment before the vehicle's lowering procedure.