How to replace the ignition coil for Bank 2 on 2008 GMC Acadia?

Replacing the ignition coil for the Bank 2 requires, firstly, the removal of the fuel injector sight shield, first. Then, unplug the engine wiring harness electrical connector(s) from the ignition coil(s) and unscrew the ignition coil bolt(s) before removing it. For installation, start by reinstalling the ignition coil(s) to place, remembering to hold the Fastener Notice. Then, install ignition coil bolt(s) and tighten them to 10 N.m (89 lb in). Then reconnect the engine wiring harness electrical connector(s), to the ignition coil(s) and lastly, install the fuel injector sight shield.

OEM 2008 GMC Acadia Ignition Coil

Ignition Coil Resistor

Select Vehicle by Model
Select Vehicle by VIN

Select Vehicle by Model

Make

Model

Year

Select Vehicle by VIN

For the most accurate results, select vehicle by your VIN (Vehicle Identification Number).

1 Ignition Coil found

View related parts
2008 GMC Acadia Ignition Coil Part Number: 12632479
$56.15 MSRP: $115.40
You Save: $59.25 (52%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Coil, Ignition; Direct Ignition Coil; Coil On Plug Coil; Coil, Ignition Coil
- Replaces: 12590990, 12610626, 12618542
- Item Weight: 0.90 Pounds
- Item Dimensions: 8.3 x 3.2 x 3.1 inches
- Condition: New
- Fitment Type: Direct Replacement
- Require Quantity: 6
- SKU: 12632479
- Warranty: This genuine part is guaranteed by GM's factory warranty.
More Info
Fits the following 2008 GMC Acadia Submodels:
- Denali, SL, SLE, SLT | 6 Cyl 3.6 L GAS

2008 GMC Acadia Ignition Coil

With a comprehensive array of OEM 2008 GMC Acadia Ignition Coil, from fuel pumps to door handles, our website is a one-stop-shop for your needs. All our genuine 2008 GMC Acadia Ignition Coil are backed by the manufacturer's warranty and are offered at competitive prices in the market. Rest assured, you can shop with complete confidence.

2008 GMC Acadia Ignition Coil Parts and Q&A

Q: How to replace the ignition coil for Bank 2 on 2008 GMC Acadia?
A: Replacing the ignition coil for the Bank 2 requires, firstly, the removal of the fuel injector sight shield, first. Then, unplug the engine wiring harness electrical connector(s) from the ignition coil(s) and unscrew the ignition coil bolt(s) before removing it. For installation, start by reinstalling the ignition coil(s) to place, remembering to hold the Fastener Notice. Then, install ignition coil bolt(s) and tighten them to 10 N.m (89 lb in). Then reconnect the engine wiring harness electrical connector(s), to the ignition coil(s) and lastly, install the fuel injector sight shield.