How to replace the MAP Sensor on 2008 GMC Acadia?

First of all, remove fuel injector sight shield in order to change the Manifold Absolute Pressure Sensor. Unscrew the engine wiring harness after which the sensor and its bolt are removed. Apply lubricant to the new O-ring seal, fit the sensor and bolt, replace the wiring harness, and re-fit the sight shield.

OEM 2008 GMC Acadia MAP Sensor

Manifold Air Pressure Sensor

Select Vehicle by Model
Select Vehicle by VIN

Select Vehicle by Model

Make

Model

Year

Select Vehicle by VIN

For the most accurate results, select vehicle by your VIN (Vehicle Identification Number).

1 MAP Sensor found

View related parts
2008 GMC Acadia M.A.P. Sensor Part Number: 55573248
$27.69 MSRP: $45.61
You Save: $17.92 (40%)
Ships in 1-3 Business Days
ADD TO CART
Product Specifications
- Other Name: Sensor, Computer Control; Air Pressure Sensor; Height Adaptation; Manifold Absolute Pressure Sensor; MAP Sensor; Ignition Module; Sensor; Sensor, Turbocharger/Supercharger
- Replaces: 12591290, 93192107
- Item Weight: 0.40 Pounds
- Item Dimensions: 2.7 x 2.2 x 1.4 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 55573248
- Warranty: This genuine part is guaranteed by GM's factory warranty.
More Info
Fits the following 2008 GMC Acadia Submodels:
- Denali, SL, SLE, SLT | 4 Cyl 2.5 L GAS, 6 Cyl 3.6 L GAS

2008 GMC Acadia MAP Sensor

With a comprehensive array of OEM 2008 GMC Acadia MAP Sensor, from fuel pumps to door handles, our website is a one-stop-shop for your needs. All our genuine 2008 GMC Acadia MAP Sensor are backed by the manufacturer's warranty and are offered at competitive prices in the market. Rest assured, you can shop with complete confidence.

2008 GMC Acadia MAP Sensor Parts and Q&A

Q: How to replace the MAP Sensor on 2008 GMC Acadia?
A: First of all, remove fuel injector sight shield in order to change the Manifold Absolute Pressure Sensor. Unscrew the engine wiring harness after which the sensor and its bolt are removed. Apply lubricant to the new O-ring seal, fit the sensor and bolt, replace the wiring harness, and re-fit the sight shield.