How to replace the coil springs and shock absorber assembly on 2008 GMC Envoy?

First remove the shock module upper retaining nuts on each side but handle the coil springs with caution to maintain the coating since coatings protect the springs from failure. Support the vehicle at a raised position before you take off the tire together with the wheel. The shock module yoke needs detachment from the lower Control Arm and then the shock module should be removed from both the shock tower and lower Control Arm. Start the installation process by attaching the shock module to both the shock tower and lower Control Arm and afterward connecting the shock module yoke to the lower Control Arm. After positioning the vehicle in a lower position you should install the shock module upper retaining nuts at 45 n.m (33 lb ft). After the support is removed the vehicle receives its tire followed by wheel installation while lowering to the ground.

OEM 2008 GMC Envoy Coil Springs

Strut Spring

Select Vehicle by Model
Select Vehicle by VIN

Select Vehicle by Model

Make

Model

Year

Select Vehicle by VIN

For the most accurate results, select vehicle by your VIN (Vehicle Identification Number).

4 Coil Springs found

View related parts
2008 GMC Envoy Spring, Front
Part Number: 15125884
Product Specifications
- Other Name: Spring, Front Chassis; Coil Springs
- Position: Front
- Item Weight: 10.50 Pounds
- Item Dimensions: 17.3 x 5.6 x 5.6 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 15125884
- Warranty: This genuine part is guaranteed by GM's factory warranty.
More Info
Fits the following 2008 GMC Envoy Submodels:
- Denali, SLE, SLT | 6 Cyl 4.2 L GAS, 8 Cyl 5.3 L GAS
View related parts
2008 GMC Envoy Coil Spring, Front
Part Number: 15125881
Product Specifications
- Other Name: Spring, Front Chassis; Coil Springs; Spring
- Position: Front
- Item Weight: 11.00 Pounds
- Item Dimensions: 16.8 x 5.7 x 5.8 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 15125881
- Warranty: This genuine part is guaranteed by GM's factory warranty.
More Info
Fits the following 2008 GMC Envoy Submodels:
- Denali, SLE, SLT | 6 Cyl 4.2 L GAS, 8 Cyl 5.3 L GAS
View related parts
2008 GMC Envoy Spring, Rear
Part Number: 15948009
Product Specifications
- Other Name: Spring, Rear Spring; Coil Springs; Spring, Rear
- Position: Rear
- Replaces: 15174232, 15207740
- Item Weight: 7.60 Pounds
- Item Dimensions: 16.9 x 6.1 x 6.1 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 15948009
- Warranty: This genuine part is guaranteed by GM's factory warranty.
More Info
Fits the following 2008 GMC Envoy Submodels:
- Denali, SLE, SLT | 6 Cyl 4.2 L GAS, 8 Cyl 5.3 L GAS
View related parts
2008 GMC Envoy Coil Spring, Rear
Part Number: 15948005
Product Specifications
- Other Name: Spring, Rear Spring; Coil Springs; Spring; Spring, Rear
- Position: Rear
- Replaces: 15207736, 15174228
- Item Weight: 10.00 Pounds
- Item Dimensions: 17.2 x 6.0 x 6.0 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 15948005
- Warranty: This genuine part is guaranteed by GM's factory warranty.
More Info
Fits the following 2008 GMC Envoy Submodels:
- Denali, SLE, SLT | 6 Cyl 4.2 L GAS, 8 Cyl 5.3 L GAS

2008 GMC Envoy Coil Springs

With a comprehensive array of OEM 2008 GMC Envoy Coil Springs, from fuel pumps to door handles, our website is a one-stop-shop for your needs. All our genuine 2008 GMC Envoy Coil Springs are backed by the manufacturer's warranty and are offered at competitive prices in the market. Rest assured, you can shop with complete confidence.

2008 GMC Envoy Parts Questions & Experts Answers

Q: How to replace the coil springs and shock absorber assembly on 2008 GMC Envoy?
A: First remove the shock module upper retaining nuts on each side but handle the coil springs with caution to maintain the coating since coatings protect the springs from failure. Support the vehicle at a raised position before you take off the tire together with the wheel. The shock module yoke needs detachment from the lower Control Arm and then the shock module should be removed from both the shock tower and lower Control Arm. Start the installation process by attaching the shock module to both the shock tower and lower Control Arm and afterward connecting the shock module yoke to the lower Control Arm. After positioning the vehicle in a lower position you should install the shock module upper retaining nuts at 45 n.m (33 lb ft). After the support is removed the vehicle receives its tire followed by wheel installation while lowering to the ground.