How to Replace an Oil Pressure Switch on 2008 GMC Envoy?

Begin engine oil pressure sensor or switch replacement by using suitable hoisting equipment to lift the vehicle. Next, remove the engine shield. You must disconnect the electrical connector from the oil pressure switch followed by removing the switch. Start by installing your new oil pressure switch before securing it at 20 N.m (15 lb ft). Connect the electrical connector to the oil pressure switch before reinstalling the engine shield. Finally, lower the vehicle.

OEM 2008 GMC Envoy Oil Pressure Switch

Oil Pressure Sender Switch

Select Vehicle by Model
Select Vehicle by VIN

Select Vehicle by Model

Make

Model

Year

Select Vehicle by VIN

For the most accurate results, select vehicle by your VIN (Vehicle Identification Number).

1 Oil Pressure Switch found

View related parts
2008 GMC Envoy Oil Pressure Sensor
Part Number: 12677836
$52.01 MSRP: $101.82
You Save: $49.81 (49%)
ADD TO CART
Product Specifications
- Other Name: Sensor Assembly-Engine Oil Pressure; Engine Oil Pressure Switch; Oil Pressure Switch; Oil Pressure Sending Unit; Sensor, Engine Oil Pressure/Temperature
- Replaces: 12562230, 12614969, 12559780, 12556117, 12573107, 12616646
- Item Weight: 0.40 Pounds
- Item Dimensions: 2.6 x 1.8 x 1.3 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 12677836
- Warranty: This genuine part is guaranteed by GM's factory warranty.
More Info
Fits the following 2008 GMC Envoy Submodels:
- Denali, SLE, SLT | 6 Cyl 4.2 L GAS, 8 Cyl 5.3 L GAS

2008 GMC Envoy Oil Pressure Switch

With a comprehensive array of OEM 2008 GMC Envoy Oil Pressure Switch, from fuel pumps to door handles, our website is a one-stop-shop for your needs. All our genuine 2008 GMC Envoy Oil Pressure Switch are backed by the manufacturer's warranty and are offered at competitive prices in the market. Rest assured, you can shop with complete confidence.

2008 GMC Envoy Parts Questions & Experts Answers

Q: How to Replace an Oil Pressure Switch on 2008 GMC Envoy?
A: Begin engine oil pressure sensor or switch replacement by using suitable hoisting equipment to lift the vehicle. Next, remove the engine shield. You must disconnect the electrical connector from the oil pressure switch followed by removing the switch. Start by installing your new oil pressure switch before securing it at 20 N.m (15 lb ft). Connect the electrical connector to the oil pressure switch before reinstalling the engine shield. Finally, lower the vehicle.