Menu
×
Search Bar
Search by Part Number, Part Name, or Vehicle
My Garage
Cart
Help Center Contact Us

OEM 2008 GMC Yukon Crankshaft Seal

  • Select Vehicle by Model
  • Select Vehicle by VIN
Select Vehicle by Model
Make
Model
Year
or
Select Vehicle by VIN
For the most accurate results, select vehicle by your VIN (Vehicle Identification Number).

1 Crankshaft Seal found

  • 2008 GMC Yukon Crankshaft Seal - 89060436
    2008 GMC Yukon Crankshaft Seal - 89060436
    2008 GMC Yukon Crankshaft Seal - 89060436
    2008 GMC Yukon Crankshaft Seal Diagram - 89060436
    View related parts

    2008 GMC Yukon Rear Main Seal Part Number: 89060436

    $24.24 MSRP: $39.93
    You Save: $15.69 (40%)
    Ships in 1-3 Business Days
    ADD TO CART
    Product Specifications
    • Other Name: Seal Kit, Crankshaft Rear Oil; Crankshaft Seal; Seal Kit, Engine Rear Main Bearing; Seal, Engine Rear Main Bearing
    • Position: Rear
    • Replaces: 12550574, 12585671, 89018162
    • Item Weight: 0.50 Pounds
    • Item Dimensions: 5.1 x 5.3 x 1.0 inches
    • Condition: New
    • Fitment Type: Direct Replacement
    • SKU: 89060436
    • Warranty: This genuine part is guaranteed by GM's factory warranty.
    More Info
    Fits the following 2008 GMC Yukon Submodels:
    • Denali, Denali Hybrid, Hybrid, SLE, SLT | 8 Cyl 4.8 L GAS, 8 Cyl 5.3 L FLEX, 8 Cyl 5.3 L GAS, 8 Cyl 6.0 L FULL HYBRID EV-FLEX (FHEV), 8 Cyl 6.0 L FULL HYBRID EV-GAS (FHEV), 8 Cyl 6.2 L FLEX, 8 Cyl 6.2 L GAS

2008 GMC Yukon Crankshaft Seal

With a comprehensive array of OEM 2008 GMC Yukon Crankshaft Seal, from fuel pumps to door handles, our website is a one-stop-shop for your needs. All our genuine 2008 GMC Yukon Crankshaft Seal are backed by the manufacturer's warranty and are offered at competitive prices in the market. Rest assured, you can shop with complete confidence.

2008 GMC Yukon Crankshaft Seal Parts and Q&A

  • Q: How to replace the Front Crankshaft Seal for RPOs LC9/LMG/LY2/LY5 (4.8L and 5.3L) on 2008 GMC Yukon?
    A: The first step for replacing the crankshaft front oil seal of RPOs LC9/LMG/LY2/LY5 (4.8L and 5.3L) requires the removal of the crankshaft balancer. Remove the crankshaft front oil seal from the front cover space. The proper replacement method excludes oil lubrication of the oil seal's sealing area while it mandates the use of a new crankshaft front oil seal. Start the setup process by applying clean oil to the outer part of the new seal and bore of the front cover. The Crankshaft Front Oil Seal Installer (J 41478) assists with proper installation of the oil seal to its guide. To install the oil seal into the cover bore of the crankshaft you must use the J 41478 threaded rod along with its components of nut, washer, guide, and oil seal at the end of the crankshaft. Keep a wrench on the installer bolt hex while using another wrench to twist the installer nut clockwise until the seal fully meets the cover bore. Check the installation quality of the J 41478 by inspecting the oil seal position inside the front cover bore after its removal. Finally, reinstall the crankshaft balancer.

Related 2008 GMC Yukon Parts

Alternate Year Models

+
2007 GMC Yukon Crankshaft Seal 2009 GMC Yukon Crankshaft Seal