ChevyParts
My Garage
My Account
Cart
OEM 2009 Cadillac SRX Door Latch Assembly
Door Latch- Select Vehicle by Model
- Select Vehicle by VIN
Select Vehicle by Model
orMake
Model
Year
Select Vehicle by VIN
For the most accurate results, select vehicle by your VIN (Vehicle Identification Number).
5 Door Latch Assemblys found
2009 Cadillac SRX Lower Cover Part Number: 84243380
$255.52 MSRP: $372.01You Save: $116.49 (32%)Product Specifications- Other Name: Latch Assembly-Lift Gate; Trunk Latch; Door Lock; Lock; Actuator; Rear Compartment Lid or Tail Gate Latch; End Gate Lock
- Replaces: 13581405, 13501872, 13503467, 15839037, 13502698, 15779874
- Item Weight: 6.40 Pounds
- Item Dimensions: 4.9 x 4.8 x 11.5 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 84243380
- Warranty: This genuine part is guaranteed by GM's factory warranty.
2009 Cadillac SRX Lock, Rear Driver Side Part Number: 25876520
Product Specifications- Other Name: Lock, Rear Side Door; Door Latch Assembly; Door Lock
- Position: Rear Driver Side
- Replaces: 25843167, 25790699
- Item Weight: 1.80 Pounds
- Item Dimensions: 7.9 x 5.3 x 5.3 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 25876520
- Warranty: This genuine part is guaranteed by GM's factory warranty.
2009 Cadillac SRX Lock, Front Passenger Side Part Number: 25876525
Product Specifications- Other Name: Lock, Front Side Door; Door Lock
- Position: Front Passenger Side
- Replaces: 25790696, 25843207
- Item Weight: 1.80 Pounds
- Item Dimensions: 7.0 x 6.6 x 6.5 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 25876525
- Warranty: This genuine part is guaranteed by GM's factory warranty.
2009 Cadillac SRX Lock, Front Driver Side Part Number: 25876524
Product Specifications- Other Name: Lock, Front Side Door; Door Lock
- Position: Front Driver Side
- Replaces: 25843206, 25790695
- Item Weight: 1.80 Pounds
- Item Dimensions: 12.5 x 6.6 x 4.5 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 25876524
- Warranty: This genuine part is guaranteed by GM's factory warranty.
2009 Cadillac SRX Lock, Rear Passenger Side Part Number: 25876521
$171.60 MSRP: $256.55You Save: $84.95 (34%)Product Specifications- Other Name: Lock, Rear Side Door; Door Latch Assembly; Door Lock
- Position: Rear Passenger Side
- Replaces: 25843168
- Item Weight: 1.80 Pounds
- Item Dimensions: 11.8 x 4.8 x 4.9 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 25876521
- Warranty: This genuine part is guaranteed by GM's factory warranty.
2009 Cadillac SRX Door Latch Assembly
With a comprehensive array of OEM 2009 Cadillac SRX Door Latch Assembly, from fuel pumps to door handles, our website is a one-stop-shop for your needs. All our genuine 2009 Cadillac SRX Door Latch Assembly are backed by the manufacturer's warranty and are offered at competitive prices in the market. Rest assured, you can shop with complete confidence.
2009 Cadillac SRX Door Latch Assembly Parts and Q&A
- Q: How to replace the front side Door Latch Assembly on 2009 Cadillac SRX?A: The replacement of the front side door latch starts by lifting the window to its full height then removing the door trim panel. The water deflector must be taken out followed by disconnecting the lock cylinder rod when door latch supports this function. Start by opening the clip to disconnect the outside door handle rod from the door latch followed by taking out the lock knob rod from the rod guide and the inside handle rod from the rod guide. First detach the door screws before removing the door latch component from inside the door. Keep the rod for the inside handle and switch rod with the door latch. A small flat-bladed instrument should be used to elevate the electrical connector lock before disconnecting the electrical connector and afterward separating the handle rod and lock rod from the door latch. Installation begins with attaching the inside door handle rod and lock rod to the door latch which should be followed by connecting the electrical connector. Insert the door latch into the door while connecting the lock cylinder rod to it with proper tightening of screws to 10 Nm torque. Push the outside door handle rod into the latch clip. Afterward, squeeze together the clip to close it properly. The next step involves placing the lock knob rod into the rod guide and the inside handle rod also into the rod guide. A proper inspection of the door handles and lock cylinder and door latch must occur followed by reinstallation of the water deflector and the door trim panel.
Related 2009 Cadillac SRX Parts
2009 Cadillac SRX Door Armrest
2009 Cadillac SRX Door Check
2009 Cadillac SRX Door Handle
2009 Cadillac SRX Door Latch Cable
2009 Cadillac SRX Door Lock
2009 Cadillac SRX Door Lock Cylinder
2009 Cadillac SRX Door Moldings
2009 Cadillac SRX Door Seal
2009 Cadillac SRX Lift Support
2009 Cadillac SRX Liftgate Hinge
2009 Cadillac SRX Tailgate Lock
2009 Cadillac SRX Weather Strip