How to replace the Brake Light Switch on 2009 Cadillac XLR?

Beginning Brake Pedal Position Sensor replacement requires you to take off the instrument panel covering material. Switch off the connector position assurance without fully removing it and detach the power connection. Disconnect and remove the sensor brake pedal position along with the peg screw. Install a brand-new sensor into the system and insert the sensor fork onto the pin. Turn the sensor to make sure the sensor locator lines up with the extension bracket's hole. Reinstall the NEW brake pedal position sensor screw and secure it by turning to 2 Nm torque. Place the electrical connector into its proper port and fasten the CPA at the same time. Re-establish your work by setting the sensor and putting back its insulator at the end.

OEM 2009 Cadillac XLR Brake Light Switch

Brake Lamp Switch

Select Vehicle by Model
Select Vehicle by VIN

Select Vehicle by Model

Make

Model

Year

Select Vehicle by VIN

For the most accurate results, select vehicle by your VIN (Vehicle Identification Number).

1 Brake Light Switch found

View related parts
2009 Cadillac XLR Clutch Switch Part Number: 13597429
$12.12 MSRP: $19.25
You Save: $7.13 (38%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Sensor Assembly-Brake Pedal Position; Brake Light Switch; Stoplamp Switch; Sensor; Sensor, Stop Lamp Switch; Sensor, Engine Clutch; Sensor Kit, Brake; Sensor, Brake
- Replaces: 89047699
- Item Weight: 0.40 Pounds
- Item Dimensions: 3.6 x 3.4 x 1.7 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 13597429
- Warranty: This genuine part is guaranteed by GM's factory warranty.
More Info
Fits the following 2009 Cadillac XLR Submodels:
- Base, Platinum, V | 8 Cyl 4.4 L GAS, 8 Cyl 4.6 L GAS

2009 Cadillac XLR Brake Light Switch

With a comprehensive array of OEM 2009 Cadillac XLR Brake Light Switch, from fuel pumps to door handles, our website is a one-stop-shop for your needs. All our genuine 2009 Cadillac XLR Brake Light Switch are backed by the manufacturer's warranty and are offered at competitive prices in the market. Rest assured, you can shop with complete confidence.

2009 Cadillac XLR Brake Light Switch Parts and Q&A

Q: How to replace the Brake Light Switch on 2009 Cadillac XLR?
A: Beginning Brake Pedal Position Sensor replacement requires you to take off the instrument panel covering material. Switch off the connector position assurance without fully removing it and detach the power connection. Disconnect and remove the sensor brake pedal position along with the peg screw. Install a brand-new sensor into the system and insert the sensor fork onto the pin. Turn the sensor to make sure the sensor locator lines up with the extension bracket's hole. Reinstall the NEW brake pedal position sensor screw and secure it by turning to 2 Nm torque. Place the electrical connector into its proper port and fasten the CPA at the same time. Re-establish your work by setting the sensor and putting back its insulator at the end.