How to replace the Rocker Shaft Spring Kit and Valve Stem Oil Seal on the left side on 2009 Cadillac XLR?

To change the valve stem oil seal and valve spring on the left hand side, remove left camshafts and starter motor. Install the flywheel, brush off the spark plug area then spark plug removed. The valve components can be accessed and replaced using the valve spring compressor and then installed back.

OEM 2009 Cadillac XLR Rocker Shaft Spring Kit

Rocker Shaft Spring Set

Select Vehicle by Model
Select Vehicle by VIN

Select Vehicle by Model

Make

Model

Year

Select Vehicle by VIN

For the most accurate results, select vehicle by your VIN (Vehicle Identification Number).

1 Rocker Shaft Spring Kit found

View related parts
2009 Cadillac XLR Valve Springs Part Number: 12565199
$1.77 MSRP: $2.78
You Save: $1.01 (37%)
Ships in 1-3 Business Days
ADD TO CART
Product Specifications
- Other Name: Spring, Valve; Valve Spring; Spring, Engine Valve
- Item Weight: 0.40 Pounds
- Item Dimensions: 2.2 x 1.6 x 1.2 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 12565199
- Warranty: This genuine part is guaranteed by GM's factory warranty.
More Info
Fits the following 2009 Cadillac XLR Submodels:
- Base, Platinum, V | 8 Cyl 4.4 L GAS, 8 Cyl 4.6 L GAS

2009 Cadillac XLR Rocker Shaft Spring Kit

With a comprehensive array of OEM 2009 Cadillac XLR Rocker Shaft Spring Kit, from fuel pumps to door handles, our website is a one-stop-shop for your needs. All our genuine 2009 Cadillac XLR Rocker Shaft Spring Kit are backed by the manufacturer's warranty and are offered at competitive prices in the market. Rest assured, you can shop with complete confidence.

2009 Cadillac XLR Rocker Shaft Spring Kit Parts and Q&A

Q: How to replace the Rocker Shaft Spring Kit and Valve Stem Oil Seal on the left side on 2009 Cadillac XLR?
A: To change the valve stem oil seal and valve spring on the left hand side, remove left camshafts and starter motor. Install the flywheel, brush off the spark plug area then spark plug removed. The valve components can be accessed and replaced using the valve spring compressor and then installed back.