OEM 2009 Chevrolet Aveo Cam Gear

2009 Chevrolet Aveo Parts Questions & Experts Answers

• Q: How to replace the Cam Gear without variable camshaft phasing on 2009 Chevrolet Aveo?

  A: Starting the replacement process of the camshaft gear without variable camshaft phasing requires users to disconnect the negative battery cable and remove the Timing Belt. You should remove the engine cover bolts followed by the engine cover from the system. First disconnect the crankcase ventilation tubes from the valve cover and then separate the ignition wires from spark plugs and finally disconnect the camshaft position (CMP) sensor. After removing valve cover nuts and washers users should take off the valve cover along with its gasket by ensuring there is no damage to the camshaft surfaces and bearing regions. You must first clamp down the intake camshaft so you can remove both the intake camshaft gear bolt followed by its corresponding gear. Repetition of this technique needs to be performed with the exhaust camshaft gear. The installation of the intake camshaft gear begins after placing it upon the camshaft with hand support for the camshaft before tightening the gear bolt to 67.5 nm (49 lb ft). The installation method of the exhaust camshaft gear matches the intake procedure along with its bolt reaching identical torque values. The final step includes uniting crankcase ventilation tubes and ignition wires followed by the Timing Belt reinstallation. To finish the procedure replace the engine cover before reconnecting the negative battery cable.