OEM 2009 Chevrolet Cobalt Rack and Pinion Boot

2009 Chevrolet Cobalt Parts Questions & Experts Answers

• Q: How to replace the Rack and Pinion Boot on 2009 Chevrolet Cobalt?

  A: First, use keystone clamp pliers (J 22610) to take off the Rack And Pinion outer Tie Rod End before starting. Start by taking out both components: the Rack And Pinion inner tie rod nut followed by the outer steering gear boot clamp. Cut and then throw away the inner steering gear boot clamp. Before installing the new boot take a close look at the inner tie rod for damage or contamination indications. When the inspection reveals no damage continue with the repair steps. The boot needs to be taken off from the steering gear. When putting in a new steering gear boot clamp focus on installing it onto the steering gear boot while your steering equipment along with the Rack And Pinion inner tie rod remain free of contamination and debris. Place specified amounts of grease from the steering gear boot service kit while carefully seating the boot into its proper groove on the steering gear. Use keystone clamp pliers (J 22610) to crimp the steering gear boot's inner clamp after fixing the boot onto the steering gear. After installing the new Rack And Pinion inner tie rod nut, proceed with the Rack And Pinion outer Tie Rod End. Finally, adjust the front toe.