How to replace the front shock absorber on 2009 Chevrolet Cobalt?

Begin the upper strut replacement procedure by eliminating the fixings securing the mounting nuts. Lift your vehicle through frame contacts only with a frame-contact vehicle lift while eliminating the risk of suspension contact. Position the vehicle on a frame-contact vehicle lift to secure it at height. Then remove the tire along with the wheel. The process begins with stabilizer shaft link detachment from the strut assembly after which the stern strut bolts, nuts, and abs wiring bracket are removed if present before removing the strut piece. Before installation begin by setting the strut into position while adhering to fastener caution recommendations. Install the strut upper mounting nuts by tightening them to 20 nm (15 lb ft) according to prevailing torque specifications which allow their reuse only when both fasteners are rust-free and clean and display 3 nm (27 lb in) of torque/drag against each other before final tightening. Otherwise, replace the fastener. After installing the lower strut bolts together with nuts and abs wiring bracket (if present) tighten the strut lower nuts to 120 nm (89 lb ft). The stabilizer shaft link must be attached to the strut assembly before tightening its nut to 65 nm (48 lb ft). You must install the tire followed by the wheel before lowering the automobile for a visit to the front wheel alignment service provider.

OEM 2009 Chevrolet Cobalt Shock Absorber

Suspension Shock Absorber

Select Vehicle by Model
Select Vehicle by VIN

Select Vehicle by Model

Make

Model

Year

Select Vehicle by VIN

For the most accurate results, select vehicle by your VIN (Vehicle Identification Number).

9 Shock Absorbers found

View related parts
2009 Chevrolet Cobalt Strut, Front Driver Side
Part Number: 20794267
$143.57 MSRP: $259.84
You Save: $116.27 (45%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Strut Kit-Front Suspension; Complete Suspension Strut and Shock Absorber Assembly.; Strut Kit, Front And Rear Suspension
- Position: Front Driver Side
- Replaces: 15247243, 88964331, 15798897, 15876215
- Item Weight: 8.80 Pounds
- Item Dimensions: 9.2 x 8.2 x 25.4 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 20794267
- Warranty: This genuine part is guaranteed by GM's factory warranty.
More Info
Fits the following 2009 Chevrolet Cobalt Submodels:
- Base, LS, LT, LTZ, Sport, SS | 4 Cyl 2.0 L GAS, 4 Cyl 2.2 L GAS, 4 Cyl 2.4 L GAS
View related parts
2009 Chevrolet Cobalt Strut, Front Passenger Side
Part Number: 20794268
$129.74 MSRP: $243.64
You Save: $113.90 (47%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Strut Kit-Front Suspension; Complete Suspension Strut and Shock Absorber Assembly.; Strut Kit, Front And Rear Suspension
- Position: Front Passenger Side
- Replaces: 15876216, 15247244, 15798898
- Item Weight: 8.70 Pounds
- Item Dimensions: 24.5 x 9.1 x 8.2 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 20794268
- Warranty: This genuine part is guaranteed by GM's factory warranty.
More Info
Fits the following 2009 Chevrolet Cobalt Submodels:
- Base, LS, LT, LTZ, Sport, SS | 4 Cyl 2.0 L GAS, 4 Cyl 2.2 L GAS, 4 Cyl 2.4 L GAS
View related parts
2009 Chevrolet Cobalt Shock Absorber
Part Number: 25793745
$75.88 MSRP: $137.34
You Save: $61.46 (45%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Suspension Strut and Shock Absorber Assembly Kit; Complete Strut and Shock Absorber Set.; Shock; Absorber, Front And Rear Suspension
- Position: Rear
- Item Weight: 5.20 Pounds
- Item Dimensions: 5.2 x 5.2 x 20.0 inches
- Condition: New
- Fitment Type: Direct Replacement
- Require Quantity: 2
- SKU: 25793745
- Warranty: This genuine part is guaranteed by GM's factory warranty.
More Info
Fits the following 2009 Chevrolet Cobalt Submodels:
- SS | 4 Cyl 2.0 L GAS
View related parts
2009 Chevrolet Cobalt Strut, Front Passenger Side
Part Number: 20795226
$160.37 MSRP: $287.66
You Save: $127.29 (45%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Strut Kit-Front Suspension; Complete Suspension Strut and Shock Absorber Assembly.; Strut Kit, Front And Rear Suspension
- Position: Front Passenger Side
- Item Weight: 10.60 Pounds
- Item Dimensions: 9.4 x 8.2 x 24.5 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 20795226
- Warranty: This genuine part is guaranteed by GM's factory warranty.
More Info
Fits the following 2009 Chevrolet Cobalt Submodels:
- Base, LS, LT, SS | 4 Cyl 2.0 L GAS, 4 Cyl 2.2 L GAS
View related parts
2009 Chevrolet Cobalt Shock Absorber
Part Number: 22696400
$79.28 MSRP: $141.58
You Save: $62.30 (44%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Suspension Strut and Shock Absorber Assembly Kit; Complete Strut and Shock Absorber Set.; Shock; Absorber, Front And Rear Suspension
- Position: Rear
- Item Weight: 4.10 Pounds
- Item Dimensions: 19.5 x 5.3 x 5.0 inches
- Condition: New
- Fitment Type: Direct Replacement
- Require Quantity: 2
- SKU: 22696400
- Warranty: This genuine part is guaranteed by GM's factory warranty.
More Info
Fits the following 2009 Chevrolet Cobalt Submodels:
- Base, LS, LT, LTZ, Sport, SS | 4 Cyl 2.0 L GAS, 4 Cyl 2.2 L GAS, 4 Cyl 2.4 L GAS
View related parts
2009 Chevrolet Cobalt Shock Absorber
Part Number: 10368516
Product Specifications
- Other Name: Suspension Strut and Shock Absorber Assembly Kit; Complete Strut and Shock Absorber Set.; Shock; Absorber, Front And Rear Suspension
- Position: Rear
- Item Weight: 2.30 Pounds
- Item Dimensions: 5.2 x 5.3 x 19.8 inches
- Condition: New
- Fitment Type: Direct Replacement
- Require Quantity: 2
- SKU: 10368516
- Warranty: This genuine part is guaranteed by GM's factory warranty.
More Info
Fits the following 2009 Chevrolet Cobalt Submodels:
- Base, LS, LT, LTZ, Sport, SS | 4 Cyl 2.0 L GAS, 4 Cyl 2.2 L GAS, 4 Cyl 2.4 L GAS
View related parts
2009 Chevrolet Cobalt Strut, Driver Side
Part Number: 19181251
Product Specifications
- Other Name: Strut Kit, Front and Rear Suspension; Complete Suspension Assembly and Shock Absorber Set.
- Position: Driver Side
- Replaces: 15247245, 19181044
- Item Weight: 8.70 Pounds
- Item Dimensions: 24.2 x 8.9 x 8.2 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 19181251
- Warranty: This genuine part is guaranteed by GM's factory warranty.
More Info
Fits the following 2009 Chevrolet Cobalt Submodels:
- Base, LS, LT, LTZ, Sport, SS | 4 Cyl 2.0 L GAS, 4 Cyl 2.2 L GAS, 4 Cyl 2.4 L GAS
View related parts
2009 Chevrolet Cobalt Strut, Passenger Side
Part Number: 19181631
Product Specifications
- Other Name: Strut Kit, Front and Rear Suspension; Complete Suspension Assembly and Shock Absorber Set.
- Position: Passenger Side
- Replaces: 15247246, 19181043
- Item Weight: 8.20 Pounds
- Item Dimensions: 9.1 x 8.2 x 24.5 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 19181631
- Warranty: This genuine part is guaranteed by GM's factory warranty.
More Info
Fits the following 2009 Chevrolet Cobalt Submodels:
- Base, LS, LT, LTZ, Sport, SS | 4 Cyl 2.0 L GAS, 4 Cyl 2.2 L GAS, 4 Cyl 2.4 L GAS
View related parts
2009 Chevrolet Cobalt Strut, Front Driver Side
Part Number: 20795225
Product Specifications
- Other Name: Strut Kit-Front Suspension; Complete Suspension Strut and Shock Absorber Assembly.; Strut Kit, Front And Rear Suspension
- Position: Front Driver Side
- Item Weight: 3.10 Pounds
- Item Dimensions: 24.2 x 8.7 x 8.2 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 20795225
- Warranty: This genuine part is guaranteed by GM's factory warranty.
More Info
Fits the following 2009 Chevrolet Cobalt Submodels:
- Base, LS, LT, SS | 4 Cyl 2.0 L GAS, 4 Cyl 2.2 L GAS

2009 Chevrolet Cobalt Shock Absorber

With a comprehensive array of OEM 2009 Chevrolet Cobalt Shock Absorber, from fuel pumps to door handles, our website is a one-stop-shop for your needs. All our genuine 2009 Chevrolet Cobalt Shock Absorber are backed by the manufacturer's warranty and are offered at competitive prices in the market. Rest assured, you can shop with complete confidence.

2009 Chevrolet Cobalt Shock Absorber Parts Questions & Experts Answers

Q: How to replace the front shock absorber on 2009 Chevrolet Cobalt?
A: Begin the upper strut replacement procedure by eliminating the fixings securing the mounting nuts. Lift your vehicle through frame contacts only with a frame-contact vehicle lift while eliminating the risk of suspension contact. Position the vehicle on a frame-contact vehicle lift to secure it at height. Then remove the tire along with the wheel. The process begins with stabilizer shaft link detachment from the strut assembly after which the stern strut bolts, nuts, and abs wiring bracket are removed if present before removing the strut piece. Before installation begin by setting the strut into position while adhering to fastener caution recommendations. Install the strut upper mounting nuts by tightening them to 20 nm (15 lb ft) according to prevailing torque specifications which allow their reuse only when both fasteners are rust-free and clean and display 3 nm (27 lb in) of torque/drag against each other before final tightening. Otherwise, replace the fastener. After installing the lower strut bolts together with nuts and abs wiring bracket (if present) tighten the strut lower nuts to 120 nm (89 lb ft). The stabilizer shaft link must be attached to the strut assembly before tightening its nut to 65 nm (48 lb ft). You must install the tire followed by the wheel before lowering the automobile for a visit to the front wheel alignment service provider.

Related 2009 Chevrolet Cobalt Parts

Alternate Year Models

2008 Chevrolet Cobalt Shock Absorber 2010 Chevrolet Cobalt Shock Absorber