How to replace the front shock absorber assembly on 2010 Chevrolet Cobalt?

The process starts by taking out the upper mounting nuts of the strut assembly. The vehicle requires elevation with a frame-contact vehicle lift while eliminating the use of suspension-contact lifts. Before working on the tire and wheel removal begin supporting the vehicle then finish by removing both tire and wheel. Proceed by disconnecting the stabilizer shaft link from the strut assembly before removing strut lower bolts, nuts, and antilock brake system (ABS) wiring bracket if applicable. Install the new strut but always adhere to fastener caution requirements throughout installation. Use the 20 nm (15 lb ft) torque setting for prevailing torque struts after ensuring each nut develops 3 nm (27 lb in) torque against its partner. However, reusing these nuts requires their cleanliness along with the absence of rust and ability to generate the 3 nm (27 lb in) torque before final installation. Otherwise, replace the fastener. After bracing the abs wiring bracket install the strut lower bolts together with nuts while tightening the lower strut nuts to 120 nm (89 lb ft). Secure the stabilizer shaft link to the strut assembly then bolt the stabilizer shaft link nut to 65 nm (48 lb ft). Reposition the tire and wheel on the vehicle before using a floor jack to lower it. Then perform front wheel alignment procedures.

OEM 2010 Chevrolet Cobalt Shock Absorber

Suspension Shock Absorber

Select Vehicle by Model
Select Vehicle by VIN

Select Vehicle by Model

Make

Model

Year

Select Vehicle by VIN

For the most accurate results, select vehicle by your VIN (Vehicle Identification Number).

7 Shock Absorbers found

View related parts
2010 Chevrolet Cobalt Strut, Front Passenger Side Part Number: 20795226
$153.18 MSRP: $287.66
You Save: $134.48 (47%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Strut Kit-Front Suspension; Complete Suspension Strut and Shock Absorber Assembly.; Strut Kit, Front And Rear Suspension
- Position: Front Passenger Side
- Item Weight: 10.60 Pounds
- Item Dimensions: 9.4 x 8.2 x 24.5 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 20795226
- Warranty: This genuine part is guaranteed by GM's factory warranty.
More Info
Fits the following 2010 Chevrolet Cobalt Submodels:
- Base, LS, LT, SS | 4 Cyl 2.0 L GAS, 4 Cyl 2.2 L GAS
View related parts
2010 Chevrolet Cobalt Shock Absorber Part Number: 22696400
$73.76 MSRP: $144.42
You Save: $70.66 (49%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Suspension Strut and Shock Absorber Assembly Kit; Complete Strut and Shock Absorber Set.; Shock; Absorber, Front And Rear Suspension
- Position: Rear
- Item Weight: 4.10 Pounds
- Item Dimensions: 19.5 x 5.3 x 5.0 inches
- Condition: New
- Fitment Type: Direct Replacement
- Require Quantity: 2
- SKU: 22696400
- Warranty: This genuine part is guaranteed by GM's factory warranty.
More Info
Fits the following 2010 Chevrolet Cobalt Submodels:
- Base, LS, LT, LTZ, Sport, SS | 4 Cyl 2.0 L GAS, 4 Cyl 2.2 L GAS, 4 Cyl 2.4 L GAS
View related parts
2010 Chevrolet Cobalt Shock Absorber Part Number: 10368516
Product Specifications
- Other Name: Suspension Strut and Shock Absorber Assembly Kit; Complete Strut and Shock Absorber Set.; Shock; Absorber, Front And Rear Suspension
- Position: Rear
- Item Weight: 2.30 Pounds
- Item Dimensions: 5.2 x 5.3 x 19.8 inches
- Condition: New
- Fitment Type: Direct Replacement
- Require Quantity: 2
- SKU: 10368516
- Warranty: This genuine part is guaranteed by GM's factory warranty.
More Info
Fits the following 2010 Chevrolet Cobalt Submodels:
- Base, LS, LT, LTZ, Sport, SS | 4 Cyl 2.0 L GAS, 4 Cyl 2.2 L GAS, 4 Cyl 2.4 L GAS
View related parts
2010 Chevrolet Cobalt Shock Absorber Part Number: 25793745
$76.91 MSRP: $137.34
You Save: $60.43 (44%)
Product Specifications
- Other Name: Suspension Strut and Shock Absorber Assembly Kit; Complete Strut and Shock Absorber Set.; Shock; Absorber, Front And Rear Suspension
- Position: Rear
- Item Weight: 5.20 Pounds
- Item Dimensions: 5.2 x 5.2 x 20.0 inches
- Condition: New
- Fitment Type: Direct Replacement
- Require Quantity: 2
- SKU: 25793745
- Warranty: This genuine part is guaranteed by GM's factory warranty.
More Info
Fits the following 2010 Chevrolet Cobalt Submodels:
- SS | 4 Cyl 2.0 L GAS
View related parts
2010 Chevrolet Cobalt Strut, Driver Side Part Number: 19181251
Product Specifications
- Other Name: Strut Kit, Front and Rear Suspension; Complete Suspension Assembly and Shock Absorber Set.
- Position: Driver Side
- Replaces: 15247245, 19181044
- Item Weight: 8.70 Pounds
- Item Dimensions: 24.2 x 8.9 x 8.2 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 19181251
- Warranty: This genuine part is guaranteed by GM's factory warranty.
More Info
Fits the following 2010 Chevrolet Cobalt Submodels:
- Base, LS, LT, LTZ, Sport, SS | 4 Cyl 2.0 L GAS, 4 Cyl 2.2 L GAS, 4 Cyl 2.4 L GAS
View related parts
2010 Chevrolet Cobalt Strut, Passenger Side Part Number: 19181631
Product Specifications
- Other Name: Strut Kit, Front and Rear Suspension; Complete Suspension Assembly and Shock Absorber Set.
- Position: Passenger Side
- Replaces: 15247246, 19181043
- Item Weight: 8.20 Pounds
- Item Dimensions: 9.1 x 8.2 x 24.5 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 19181631
- Warranty: This genuine part is guaranteed by GM's factory warranty.
More Info
Fits the following 2010 Chevrolet Cobalt Submodels:
- Base, LS, LT, LTZ, Sport, SS | 4 Cyl 2.0 L GAS, 4 Cyl 2.2 L GAS, 4 Cyl 2.4 L GAS
View related parts
2010 Chevrolet Cobalt Strut, Front Driver Side Part Number: 20795225
Product Specifications
- Other Name: Strut Kit-Front Suspension; Complete Suspension Strut and Shock Absorber Assembly.; Strut Kit, Front And Rear Suspension
- Position: Front Driver Side
- Item Weight: 3.10 Pounds
- Item Dimensions: 24.2 x 8.7 x 8.2 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 20795225
- Warranty: This genuine part is guaranteed by GM's factory warranty.
More Info
Fits the following 2010 Chevrolet Cobalt Submodels:
- Base, LS, LT, SS | 4 Cyl 2.0 L GAS, 4 Cyl 2.2 L GAS

2010 Chevrolet Cobalt Shock Absorber

With a comprehensive array of OEM 2010 Chevrolet Cobalt Shock Absorber, from fuel pumps to door handles, our website is a one-stop-shop for your needs. All our genuine 2010 Chevrolet Cobalt Shock Absorber are backed by the manufacturer's warranty and are offered at competitive prices in the market. Rest assured, you can shop with complete confidence.

2010 Chevrolet Cobalt Shock Absorber Parts and Q&A

Q: How to replace the front shock absorber assembly on 2010 Chevrolet Cobalt?
A: The process starts by taking out the upper mounting nuts of the strut assembly. The vehicle requires elevation with a frame-contact vehicle lift while eliminating the use of suspension-contact lifts. Before working on the tire and wheel removal begin supporting the vehicle then finish by removing both tire and wheel. Proceed by disconnecting the stabilizer shaft link from the strut assembly before removing strut lower bolts, nuts, and antilock brake system (ABS) wiring bracket if applicable. Install the new strut but always adhere to fastener caution requirements throughout installation. Use the 20 nm (15 lb ft) torque setting for prevailing torque struts after ensuring each nut develops 3 nm (27 lb in) torque against its partner. However, reusing these nuts requires their cleanliness along with the absence of rust and ability to generate the 3 nm (27 lb in) torque before final installation. Otherwise, replace the fastener. After bracing the abs wiring bracket install the strut lower bolts together with nuts while tightening the lower strut nuts to 120 nm (89 lb ft). Secure the stabilizer shaft link to the strut assembly then bolt the stabilizer shaft link nut to 65 nm (48 lb ft). Reposition the tire and wheel on the vehicle before using a floor jack to lower it. Then perform front wheel alignment procedures.