OEM 2009 Chevrolet Cobalt Starter

2009 Chevrolet Cobalt Starter Parts Questions & Experts Answers

• Q: How to replace the starter motor on 2009 Chevrolet Cobalt?

  A: Before a Starter motor is replaced, disconnect the cable of the negative battery. In the next step, lift the vehicle and support it. Unscrew the Starter solenoid terminal nut as well as the positive Battery Cable terminal in addition to the Starter solenoid wire terminal from the Starter. Pull off the engine harness connector from the Starter and remove the Starter bolts prior to removing the Starter. For installing, mount the Starter to the engine, understanding it requires fastener precautions. For the Starter bolts, install them with a torque of 40 nm (30 lb ft). Connect the engine harness connector to the Starter, then install the Starter solenoid wire terminal, and the positive Battery Cable terminal, ensuring that the anti-rotational tab is in the proper indexing slot. Lastly install the Starter solenoid terminal nut and draw ittight to 17 nm (13 lb ft) and bring the vehicle to the ground and reconnect the negative Battery Cable.