OEM 2009 Chevrolet Colorado Transfer Case Seal

2009 Chevrolet Colorado Parts Questions & Experts Answers

• Q: How to replace the input shaft transfer case seal on 2009 Chevrolet Colorado?

  A: The replacement of input shaft seal starts with transferring the Transfer Case assembly. Place the j 45759 (Assembly Fixture) onto the Transfer Case through its four suitable bolt mounting holes. Place the j 3289-20 (Holding Fixture) onto a solid workbench before installing the j 45759 (Assembly Fixture) with Transfer Case into the fixture while securing it with the pivot pin. Use the j 45278 (Seal Remover) below the seal for removal while being cautious because the Transfer Case has no sealing shoulder. The input shaft seal extraction from the Transfer Case requires the j 23907 (Slide Hammer with Bearing Adapter) together with the j 45278 (Seal Remover). After extraction discard both components. To install the new input shaft seal into the Transfer Case utilize the j 45934 (Input Seal Installer) together with a hammer while making sure the seal reaches its proper depth. The process concludes with transferring the j 45759 (Assembly Fixture) off the Transfer Case before reinstallation of the Transfer Case assembly.