OEM 2009 Chevrolet HHR Fuel Filler Hose

2009 Chevrolet HHR Fuel Filler Hose Parts Questions & Experts Answers

• Q: How to replace the fuel filler hose on 2009 Chevrolet HHR?

  A: The initial step for Fuel Tank filler pipe replacement demands a complete drain of the Fuel Tank. Begin by taking out both fuel fill pipe to fill pipe housing bolts as well as the fuel fill pocket. Begin by supporting the vehicle under elevation then remove the fuel fill pipe lower screw. The procedure for replacing the Fuel Tank filler pipe requires disconnecting both quick connect pieces of the Fuel Tank vent pipe (1, 3) and releasing the Fuel Tank hose clamp. Afterward, remove the Fuel Tank hose and the fuel fill pipe from the vehicle. The process starts by attaching the fuel fill pipe to its vehicle mount and following up with attaching the fuel fill pipe hose to the Fuel Tank. Tighten the fuel fill pipe hose clamp at the Fuel Tank until it reaches a torque of 4.5 nm (40 lb in) while also installing the Fuel Tank vent pipe quick connect fittings (1, 3). When installing the lower bolt for the fuel fill pipe tighten it to 10 nm (89 lb in) and then lower the vehicle. Install the fuel fill pocket and then secure the fuel fill pipe to fill pipe housing with 1.5 nm (13 lb in) torque. The absence of fuel requires adding new fuel before tightening the fuel fill cap.