How to replace the engine oil pressure switch on 2009 Chevrolet Malibu?

To replace the engine Oil Pressure Switch, detach first the Starter using appropriate procedures depending on whether you have lat, ly7, or le5 type of engine. Then unplug the engine wiring harness electrical connector from the Oil Pressure Switch and remove the switch. When installing, make sure to tighten the new engine Oil Pressure Switch to 22 nm (16 lb ft) and relocate the engine wiring harness electrical connector to the switch. Finally, reinstall the Starter as was done in removal process.

OEM 2009 Chevrolet Malibu Oil Pressure Switch

Oil Pressure Sender Switch

Select Vehicle by Model
Select Vehicle by VIN

Select Vehicle by Model

Make

Model

Year

Select Vehicle by VIN

For the most accurate results, select vehicle by your VIN (Vehicle Identification Number).

3 Oil Pressure Switches found

View related parts
2009 Chevrolet Malibu Pressure Switch Part Number: 12635957
$48.31 MSRP: $82.24
You Save: $33.93 (42%)
ADD TO CART
Product Specifications
- Other Name: Switch, Engine Oil Pressure/Temperature; Oil Pressure Gauge Switch; Sensor; Switch; Pressure Sensor; Oil Pressure Sending Unit; Switch
- Replaced by: 19436253
- Replaces: 12611588, 12570964, 12590793, 12579946
- Item Weight: 0.40 Pounds
- Item Dimensions: 3.1 x 2.2 x 2.1 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 12635957
- Warranty: This genuine part is guaranteed by GM's factory warranty.
More Info
Fits the following 2009 Chevrolet Malibu Submodels:
- LT, LTZ | 6 Cyl 3.6 L GAS
View related parts
2009 Chevrolet Malibu Pressure Switch, Green Line Part Number: 12635992
$17.69 MSRP: $29.14
You Save: $11.45 (40%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Switch, Engine Oil Pressure/Temperature; Oil Pressure Sensor; Oil Pressure Switch; Oil Pressure Sending Unit
- Replaced by: 19436255
- Replaces: 12610185, 24577642
- Item Weight: 0.40 Pounds
- Item Dimensions: 2.9 x 1.6 x 1.2 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 12635992
- Warranty: This genuine part is guaranteed by GM's factory warranty.
More Info
Fits the following 2009 Chevrolet Malibu Submodels:
- Base, Classic LS, Eco, Hybrid, LS, LT, LTZ | 4 Cyl 2.0 L GAS, 4 Cyl 2.2 L GAS, 4 Cyl 2.4 L FLEX, 4 Cyl 2.4 L FULL HYBRID EV-GAS (FHEV), 4 Cyl 2.4 L GAS, 4 Cyl 2.4 L MILD HYBRID EV-GAS (MHEV), 4 Cyl 2.5 L GAS
View related parts
2009 Chevrolet Malibu Pressure Switch Part Number: 12674782
$33.56 MSRP: $57.14
You Save: $23.58 (42%)
ADD TO CART
Product Specifications
- Other Name: Sensor Assembly-Engine Oil Pressure; Pressure Sensor/Switch; Pressure Sensor; Oil Pressure Sending Unit; Sensor, Engine Oil Pressure/Temperature
- Replaces: 12621649, 12621659, 12570798
- Item Weight: 0.40 Pounds
- Item Dimensions: 3.1 x 2.1 x 2.1 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 12674782
- Warranty: This genuine part is guaranteed by GM's factory warranty.
More Info
Fits the following 2009 Chevrolet Malibu Submodels:
- Classic LS, Classic LT, LS, LT, LTZ, SS | 6 Cyl 3.5 L FLEX, 6 Cyl 3.5 L GAS, 6 Cyl 3.9 L GAS

2009 Chevrolet Malibu Oil Pressure Switch

With a comprehensive array of OEM 2009 Chevrolet Malibu Oil Pressure Switch, from fuel pumps to door handles, our website is a one-stop-shop for your needs. All our genuine 2009 Chevrolet Malibu Oil Pressure Switch are backed by the manufacturer's warranty and are offered at competitive prices in the market. Rest assured, you can shop with complete confidence.

2009 Chevrolet Malibu Oil Pressure Switch Parts and Q&A

Q: How to replace the engine oil pressure switch on 2009 Chevrolet Malibu?
A: To replace the engine Oil Pressure Switch, detach first the Starter using appropriate procedures depending on whether you have lat, ly7, or le5 type of engine. Then unplug the engine wiring harness electrical connector from the Oil Pressure Switch and remove the switch. When installing, make sure to tighten the new engine Oil Pressure Switch to 22 nm (16 lb ft) and relocate the engine wiring harness electrical connector to the switch. Finally, reinstall the Starter as was done in removal process.