How to replace the rear axle wheel bearing and wheel seal on 2009 Chevrolet Tahoe?

To change the drive belt, one has to loosen the tensioner using a breaker bar and then take out the belt. Install the new belt in all the pulleys except the tensioner, lower the car and feed the belt over the tensioner. Make sure that the routing and alignment are correct, and then turn on the engine and make sure that it works.

OEM 2009 Chevrolet Tahoe Wheel Bearing

Hub Bearing

Select Vehicle by Model
Select Vehicle by VIN

Select Vehicle by Model

Make

Model

Year

Select Vehicle by VIN

For the most accurate results, select vehicle by your VIN (Vehicle Identification Number).

3 Wheel Bearings found

View related parts
2009 Chevrolet Tahoe Output Shaft Bearing, Front Part Number: 26066885
$30.92 MSRP: $58.06
You Save: $27.14 (47%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Bearing, Front Axle; Differential Pinion Bearing; Wheel Bearing; Axle Bearing; Inner Pinion Bearing; Bearing, Front Axle And Axle Center
- Position: Front
- Item Weight: 0.40 Pounds
- Item Dimensions: 2.2 x 2.2 x 0.7 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 26066885
- Warranty: This genuine part is guaranteed by GM's factory warranty.
More Info
Fits the following 2009 Chevrolet Tahoe Submodels:
- Base, Hybrid, LS, LT, LTZ, PPV, Premier, SSV, Z71 | 8 Cyl 4.8 L GAS, 8 Cyl 5.3 L FLEX, 8 Cyl 5.3 L GAS, 8 Cyl 5.7 L GAS, 8 Cyl 6.0 L FULL HYBRID EV-FLEX (FHEV), 8 Cyl 6.0 L FULL HYBRID EV-GAS (FHEV), 8 Cyl 6.2 L FLEX, 8 Cyl 6.2 L GAS
View related parts
2009 Chevrolet Tahoe Wheel Bearing, Rear Part Number: 12479031
$49.62 MSRP: $96.32
You Save: $46.70 (49%)
ADD TO CART
Product Specifications
- Other Name: Bearing, Rear Axle Shaft; Wheel Bearing Kit; Axle Bearing; Axle Bearings; Shaft Bearings; Outer Bearing; Bearing; Bearing, Rear Wheel
- Position: Rear
- Replaces: 09442126, 9442126
- Item Weight: 1.10 Pounds
- Item Dimensions: 3.4 x 3.5 x 1.2 inches
- Condition: New
- Fitment Type: Direct Replacement
- Require Quantity: 2
- SKU: 12479031
- Warranty: This genuine part is guaranteed by GM's factory warranty.
More Info
Fits the following 2009 Chevrolet Tahoe Submodels:
- Base, Hybrid, Limited, LS, LT, LTZ, PPV, Premier, SSV, Z71 | 8 Cyl 4.8 L GAS, 8 Cyl 5.3 L FLEX, 8 Cyl 5.3 L GAS, 8 Cyl 5.7 L GAS, 8 Cyl 6.0 L FULL HYBRID EV-FLEX (FHEV), 8 Cyl 6.0 L FULL HYBRID EV-GAS (FHEV), 8 Cyl 6.2 L FLEX, 8 Cyl 6.2 L GAS, 8 Cyl 6.5 L DIESEL
View related parts
2009 Chevrolet Tahoe Front Hub Part Number: 84856653
$241.51 MSRP: $472.84
You Save: $231.33 (49%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Hub Assembly-Front Wheel (W/ Bearing & Wheel Speed Sensor); Wheel Hub Repair Kit; Wheel Bearing; Axle Bearing; Wheel Hub; Hub & Bearing; Hub, Front Wheel
- Position: Front
- Replaces: 10393170, 20883242, 84356642, 25819677, 22841380
- Item Weight: 17.20 Pounds
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 84856653
- Warranty: This genuine part is guaranteed by GM's factory warranty.
More Info
Fits the following 2009 Chevrolet Tahoe Submodels:
- Hybrid, LS, LT, LTZ, PPV, SSV | 8 Cyl 4.8 L GAS, 8 Cyl 5.3 L FLEX, 8 Cyl 5.3 L GAS, 8 Cyl 6.0 L FULL HYBRID EV-FLEX (FHEV), 8 Cyl 6.0 L FULL HYBRID EV-GAS (FHEV), 8 Cyl 6.2 L FLEX, 8 Cyl 6.2 L GAS

2009 Chevrolet Tahoe Wheel Bearing

With a comprehensive array of OEM 2009 Chevrolet Tahoe Wheel Bearing, from fuel pumps to door handles, our website is a one-stop-shop for your needs. All our genuine 2009 Chevrolet Tahoe Wheel Bearing are backed by the manufacturer's warranty and are offered at competitive prices in the market. Rest assured, you can shop with complete confidence.

2009 Chevrolet Tahoe Wheel Bearing Parts and Q&A

Q: How to replace the rear axle wheel bearing and wheel seal on 2009 Chevrolet Tahoe?
A: To change the drive belt, one has to loosen the tensioner using a breaker bar and then take out the belt. Install the new belt in all the pulleys except the tensioner, lower the car and feed the belt over the tensioner. Make sure that the routing and alignment are correct, and then turn on the engine and make sure that it works.