How to replace the Brake Light Switch on 2009 GMC Envoy?

Start the switch replacement by taking off the left sound insulator first. The Pushrod retainer should be detached from the brake pedal pin before extracting the stop lamp switch and Pushrod from the pedal pin. Irreplace the electrical connector from the stop lamp switch before you take out the switch from the car. Connect the electrical connector to the stop lamp switch before placing the switch on the Pushrod and installing the whole assembly onto the brake pedal pin. Reinstall the brake pedal pin by snappin the Pushrod retainer back in place followed by installing the left sound insulator.

OEM 2009 GMC Envoy Brake Light Switch

Brake Lamp Switch

Select Vehicle by Model
Select Vehicle by VIN

Select Vehicle by Model

Make

Model

Year

Select Vehicle by VIN

For the most accurate results, select vehicle by your VIN (Vehicle Identification Number).

1 Brake Light Switch found

View related parts
2009 GMC Envoy Stoplamp Switch Part Number: 15128874
$34.51 MSRP: $64.40
You Save: $29.89 (47%)
ADD TO CART
Product Specifications
- Other Name: Switch, Stop Lamp; Brake Light Switch; Switch, Stop Lamp Switch
- Replaces: 15163032, 15038393, 25771554, 15161650, 15158767
- Item Weight: 0.40 Pounds
- Item Dimensions: 3.9 x 2.8 x 1.1 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 15128874
- Warranty: This genuine part is guaranteed by GM's factory warranty.
More Info
Fits the following 2009 GMC Envoy Submodels:
- Denali, SLE, SLT | 6 Cyl 4.2 L GAS, 8 Cyl 5.3 L GAS

2009 GMC Envoy Brake Light Switch

With a comprehensive array of OEM 2009 GMC Envoy Brake Light Switch, from fuel pumps to door handles, our website is a one-stop-shop for your needs. All our genuine 2009 GMC Envoy Brake Light Switch are backed by the manufacturer's warranty and are offered at competitive prices in the market. Rest assured, you can shop with complete confidence.

2009 GMC Envoy Brake Light Switch Parts and Q&A

Q: How to replace the Brake Light Switch on 2009 GMC Envoy?
A: Start the switch replacement by taking off the left sound insulator first. The Pushrod retainer should be detached from the brake pedal pin before extracting the stop lamp switch and Pushrod from the pedal pin. Irreplace the electrical connector from the stop lamp switch before you take out the switch from the car. Connect the electrical connector to the stop lamp switch before placing the switch on the Pushrod and installing the whole assembly onto the brake pedal pin. Reinstall the brake pedal pin by snappin the Pushrod retainer back in place followed by installing the left sound insulator.