How to replace the Exhaust Heat Shield for the Oxygen Sensor Wiring Harness on 2010 Buick Lucerne?

The first step to replace the Oxygen Sensor wiring harness heat shield involves raising and supporting the vehicle. You need to drill out the rivets because lowering the heat shield allows you to disconnect heated Oxygen Sensor (HO2S) clips. Remove the heat shield completely. You must elevate the heat shield to join ho2s clips before putting it in position against the floor panel and installing the rivets with a rivet gun just before lowering the vehicle. Protective goggles should be used for rivet-drilling tasks to decrease the chances of harm.

OEM 2010 Buick Lucerne Exhaust Heat Shield

Heat Shield

Select Vehicle by Model
Select Vehicle by VIN

Select Vehicle by Model

Make

Model

Year

Select Vehicle by VIN

For the most accurate results, select vehicle by your VIN (Vehicle Identification Number).

3 Exhaust Heat Shields found

View related parts
2010 Buick Lucerne Heat Shield
Part Number: 12612663
Product Specifications
- Other Name: Shield, Exhaust Pipe; Exhaust Heat Shield
- Position: Upper
- Item Weight: 1.30 Pounds
- Item Dimensions: 23.7 x 7.4 x 5.0 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 12612663
- Warranty: This genuine part is guaranteed by GM's factory warranty.
More Info
Fits the following 2010 Buick Lucerne Submodels:
- CX, CXL, CXL Special Edition | 6 Cyl 3.9 L FLEX, 6 Cyl 3.9 L GAS
View related parts
2010 Buick Lucerne Heat Shield, Driver Side
Part Number: 12586678
Product Specifications
- Other Name: Shield-Exhaust Manifold Heat; Exhaust Heat Shield; Shield, Exhaust Manifold
- Position: Driver Side
- Item Weight: 1.10 Pounds
- Item Dimensions: 15.3 x 9.3 x 2.1 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 12586678
- Warranty: This genuine part is guaranteed by GM's factory warranty.
More Info
Fits the following 2010 Buick Lucerne Submodels:
- CX, CXL, CXL Special Edition | 6 Cyl 3.9 L FLEX, 6 Cyl 3.9 L GAS
View related parts
2010 Buick Lucerne Heat Shield, Passenger Side
Part Number: 12577722
Product Specifications
- Other Name: Shield, Exhaust Manifold; Exhaust Heat Shield
- Position: Passenger Side
- Item Weight: 1.30 Pounds
- Item Dimensions: 18.5 x 11.2 x 5.3 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 12577722
- Warranty: This genuine part is guaranteed by GM's factory warranty.
More Info
Fits the following 2010 Buick Lucerne Submodels:
- CX, CXL, CXL Special Edition | 6 Cyl 3.9 L FLEX, 6 Cyl 3.9 L GAS

2010 Buick Lucerne Exhaust Heat Shield

With a comprehensive array of OEM 2010 Buick Lucerne Exhaust Heat Shield, from fuel pumps to door handles, our website is a one-stop-shop for your needs. All our genuine 2010 Buick Lucerne Exhaust Heat Shield are backed by the manufacturer's warranty and are offered at competitive prices in the market. Rest assured, you can shop with complete confidence.

2010 Buick Lucerne Exhaust Heat Shield Parts Questions & Experts Answers

Q: How to replace the Exhaust Heat Shield for the Oxygen Sensor Wiring Harness on 2010 Buick Lucerne?
A: The first step to replace the Oxygen Sensor wiring harness heat shield involves raising and supporting the vehicle. You need to drill out the rivets because lowering the heat shield allows you to disconnect heated Oxygen Sensor (HO2S) clips. Remove the heat shield completely. You must elevate the heat shield to join ho2s clips before putting it in position against the floor panel and installing the rivets with a rivet gun just before lowering the vehicle. Protective goggles should be used for rivet-drilling tasks to decrease the chances of harm.