How to replace the Fuel Pressure Sensor (NT7, NU5) on 2010 Buick Lucerne?

The replacement process of the Fuel Tank Pressure Sensor (NT7, NU5) starts with removing the rear compartment liner. First remove the bolts securing the fuel sender access hole cover before taking out its corresponding cover. Remove the fuel tank pressure sensor and seal assembly after disconnecting its wiring harness electrical connector from the fuel sensor. The new sensor assembly should be installed followed by connections of the fuel level sensor wiring harness electrical connector to the sensor and finally reinstating the fuel sender access hole cover. Install the fuel sender access hole cover bolts while tightening them to 2 Nm (18 lb in). Reinstall the rear compartment liner as the last step.

OEM 2010 Buick Lucerne Fuel Pressure Sensor

Fuel Tank Pressure Sensor

Select Vehicle by Model
Select Vehicle by VIN

Select Vehicle by Model

Make

Model

Year

Select Vehicle by VIN

For the most accurate results, select vehicle by your VIN (Vehicle Identification Number).

1 Fuel Pressure Sensor found

View related parts
2010 Buick Lucerne Pressure Sensor, Passenger Side
Part Number: 13502903
$47.79 MSRP: $98.21
You Save: $50.42 (52%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Sensor Kit, Fuel Tank Meter/Pump; Fuel Tank Pressure Sensor; Level Sensor; Tank Pressure Sensor; Sensor; Sensor, Early Fuel Evaporation; Sensor, Fuel Tank Meter/Pump
- Position: Passenger Side
- Replaces: 13502510
- Item Weight: 0.30 Pounds
- Item Dimensions: 2.9 x 2.1 x 1.2 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 13502903
- Warranty: This genuine part is guaranteed by GM's factory warranty.
More Info
Fits the following 2010 Buick Lucerne Submodels:
- CX, CXL, CXL Special Edition, Super | 6 Cyl 3.9 L FLEX, 6 Cyl 3.9 L GAS, 8 Cyl 4.6 L GAS

2010 Buick Lucerne Fuel Pressure Sensor

With a comprehensive array of OEM 2010 Buick Lucerne Fuel Pressure Sensor, from fuel pumps to door handles, our website is a one-stop-shop for your needs. All our genuine 2010 Buick Lucerne Fuel Pressure Sensor are backed by the manufacturer's warranty and are offered at competitive prices in the market. Rest assured, you can shop with complete confidence.

2010 Buick Lucerne Fuel Pressure Sensor Parts Questions & Experts Answers

Q: How to replace the Fuel Pressure Sensor (NT7, NU5) on 2010 Buick Lucerne?
A: The replacement process of the Fuel Tank Pressure Sensor (NT7, NU5) starts with removing the rear compartment liner. First remove the bolts securing the fuel sender access hole cover before taking out its corresponding cover. Remove the fuel tank pressure sensor and seal assembly after disconnecting its wiring harness electrical connector from the fuel sensor. The new sensor assembly should be installed followed by connections of the fuel level sensor wiring harness electrical connector to the sensor and finally reinstating the fuel sender access hole cover. Install the fuel sender access hole cover bolts while tightening them to 2 Nm (18 lb in). Reinstall the rear compartment liner as the last step.