How to Safely Replace a Fuel Level Sensor on 2010 Cadillac DTS?

Starting the replacement of the Fuel Level Sensor requires first removing the fuel sender assembly. Forced air ventilation and plugging or capping of fuel system openings should be utilized during work while simultaneously cleaning up any fuel spills and setting warning signs and following procedures to prevent sparks. Raise the level sensor by using two flat-bladed tools while pushing both locking tabs downward from their slots. A small tool with blades should be used to push electrical terminals into place as you remove the tool from their housing. To perform installation you should push the electrical terminals into the outside holes while confirming tight wire connection by gentle wire tension tests and then push the level sensor until the locking tabs snap into place. Verify that wires connecting the level sensor avoid pinching between the module and sensor before you put back the fuel sender assembly.

OEM 2010 Cadillac DTS Fuel Level Sensor

Gas Gauge Sensor

Select Vehicle by Model
Select Vehicle by VIN

Select Vehicle by Model

Make

Model

Year

Select Vehicle by VIN

For the most accurate results, select vehicle by your VIN (Vehicle Identification Number).

2 Fuel Level Sensors found

View related parts
2010 Cadillac DTS Fuel Gauge Sending Unit
Part Number: 19179766
$77.25 MSRP: $158.78
You Save: $81.53 (52%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Sensor Kit, Fuel Tank Meter/Pump; Fuel Level Sensor; Fuel Sending Unit; Level Sensor
- Replaces: 19177202
- Item Weight: 0.30 Pounds
- Item Dimensions: 11.3 x 3.9 x 3.8 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 19179766
- Warranty: This genuine part is guaranteed by GM's factory warranty.
More Info
Fits the following 2010 Cadillac DTS Submodels:
- Base, Livery, Luxury, Platinum, Premium | 8 Cyl 4.6 L GAS
View related parts
2010 Cadillac DTS Fuel Gauge Sending Unit
Part Number: 19121938
$77.04 MSRP: $214.28
You Save: $137.24 (65%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Sensor Kit, Fuel Tank Meter/Pump; Fuel Level Sensor; Fuel Sending Unit; Level Sensor
- Item Weight: 0.70 Pounds
- Item Dimensions: 8.5 x 6.1 x 6.2 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 19121938
- Warranty: This genuine part is guaranteed by GM's factory warranty.
More Info
Fits the following 2010 Cadillac DTS Submodels:
- Base, Livery, Luxury, Platinum, Premium | 8 Cyl 4.6 L GAS

2010 Cadillac DTS Fuel Level Sensor

With a comprehensive array of OEM 2010 Cadillac DTS Fuel Level Sensor, from fuel pumps to door handles, our website is a one-stop-shop for your needs. All our genuine 2010 Cadillac DTS Fuel Level Sensor are backed by the manufacturer's warranty and are offered at competitive prices in the market. Rest assured, you can shop with complete confidence.

2010 Cadillac DTS Parts Questions & Experts Answers

Q: How to Safely Replace a Fuel Level Sensor on 2010 Cadillac DTS?
A: Starting the replacement of the Fuel Level Sensor requires first removing the fuel sender assembly. Forced air ventilation and plugging or capping of fuel system openings should be utilized during work while simultaneously cleaning up any fuel spills and setting warning signs and following procedures to prevent sparks. Raise the level sensor by using two flat-bladed tools while pushing both locking tabs downward from their slots. A small tool with blades should be used to push electrical terminals into place as you remove the tool from their housing. To perform installation you should push the electrical terminals into the outside holes while confirming tight wire connection by gentle wire tension tests and then push the level sensor until the locking tabs snap into place. Verify that wires connecting the level sensor avoid pinching between the module and sensor before you put back the fuel sender assembly.