How to remove and replace the Fuse Box on 2010 Cadillac DTS?

The first step to work on a fuse block requires you to remove the electrical center cover and disconnect the positive Battery Cable from the junction box. The first step requires fastener removal while proceeding to unlock tabs on the board so you can lift it up. Use trace when removing and putting in the electrical connector then remove the fasteners which keep the electrical center in place on the vehicle. Secure the electrical center to the vehicle by using fasteners which should be tightened to 10 nm (86 lb in). Secure the electrical center board using both harness and fasteners which should be tightened to 7 nm (62 lb in). After reconnecting the positive Battery Cable you should reattach the electrical center cover.

OEM 2010 Cadillac DTS Fuse Box

Fuse Holder Box

Select Vehicle by Model
Select Vehicle by VIN

Select Vehicle by Model

Make

Model

Year

Select Vehicle by VIN

For the most accurate results, select vehicle by your VIN (Vehicle Identification Number).

1 Fuse Box found

View related parts
2010 Cadillac DTS Fuse & Relay Box
Part Number: 25865468
$287.46 MSRP: $515.62
You Save: $228.16 (45%)
ADD TO CART
Product Specifications
- Other Name: Block; Junction Boxes; Relay Boxes; Block, Main Wiring Junction And Fuse Block
- Item Weight: 3.00 Pounds
- Item Dimensions: 11.5 x 8.2 x 7.1 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 25865468
- Warranty: This genuine part is guaranteed by GM's factory warranty.
More Info
Fits the following 2010 Cadillac DTS Submodels:
- Base, Livery, Luxury, Platinum, Premium | 8 Cyl 4.6 L GAS

2010 Cadillac DTS Fuse Box

With a comprehensive array of OEM 2010 Cadillac DTS Fuse Box, from fuel pumps to door handles, our website is a one-stop-shop for your needs. All our genuine 2010 Cadillac DTS Fuse Box are backed by the manufacturer's warranty and are offered at competitive prices in the market. Rest assured, you can shop with complete confidence.

2010 Cadillac DTS Parts Questions & Experts Answers

Q: How to remove and replace the Fuse Box on 2010 Cadillac DTS?
A: The first step to work on a fuse block requires you to remove the electrical center cover and disconnect the positive Battery Cable from the junction box. The first step requires fastener removal while proceeding to unlock tabs on the board so you can lift it up. Use trace when removing and putting in the electrical connector then remove the fasteners which keep the electrical center in place on the vehicle. Secure the electrical center to the vehicle by using fasteners which should be tightened to 10 nm (86 lb in). Secure the electrical center board using both harness and fasteners which should be tightened to 7 nm (62 lb in). After reconnecting the positive Battery Cable you should reattach the electrical center cover.