How to replace the Vehicle Speed Sensor on 2010 Cadillac DTS?

Before replacing the Vehicle Speed Sensor you need to lift the vehicle. Take out the bolts 1 and 3 that attach the front transaxle brace to the transaxle and the right Cylinder Head. Pull off the Vehicle Speed Sensor (130) after disconnecting its electrical connector and removing bolt (131). Twist the sensor as you pull to assist the removal. Rephrase the following sentence considering the instructions below. An installation checklist includes connecting the Vehicle Speed Sensor (130) and fitting the retaining bolt (131) while replacing the seal when needed. Tighten the bolt to 10 nm (89 lb in). Attach the Vehicle Speed Sensor electrical connector and bolt down the two bolts (1, 3) at front transaxle brace while the vehicle is lowered.

OEM 2010 Cadillac DTS Vehicle Speed Sensor

VSS

Select Vehicle by Model
Select Vehicle by VIN

Select Vehicle by Model

Make

Model

Year

Select Vehicle by VIN

For the most accurate results, select vehicle by your VIN (Vehicle Identification Number).

2 Vehicle Speed Sensors found

View related parts
2010 Cadillac DTS Vehicle Speed Sensor Part Number: 24204319
$23.16 MSRP: $38.15
You Save: $14.99 (40%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Sensor Assembly-Vehicle Speed; Speed Sensor; Sensor, Computer Control Sensors; Sensor, Electronic Brake Control; Sensor, Speedometer Drive; Sensor, Speed Sensor
- Item Weight: 0.50 Pounds
- Item Dimensions: 3.2 x 2.9 x 1.1 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 24204319
- Warranty: This genuine part is guaranteed by GM's factory warranty.
More Info
Fits the following 2010 Cadillac DTS Submodels:
- Base, Livery, Luxury, Platinum, Premium | 8 Cyl 4.6 L GAS
View related parts
2010 Cadillac DTS Rear Speed Sensor Part Number: 4676095
Product Specifications
- Other Name: Sensor Assembly-Vehicle Speed; ABS Wheel Speed Sensor; ABS Sensor; Sensor, Computer Control Sensors; Sensor, Electronic Brake Control; Sensor, Speedometer Drive
- Item Weight: 0.50 Pounds
- Item Dimensions: 4.2 x 3.1 x 3.2 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 4676095
- Warranty: This genuine part is guaranteed by GM's factory warranty.
More Info
Fits the following 2010 Cadillac DTS Submodels:
- Base, Livery, Luxury, Platinum, Premium | 8 Cyl 4.6 L GAS

2010 Cadillac DTS Vehicle Speed Sensor

With a comprehensive array of OEM 2010 Cadillac DTS Vehicle Speed Sensor, from fuel pumps to door handles, our website is a one-stop-shop for your needs. All our genuine 2010 Cadillac DTS Vehicle Speed Sensor are backed by the manufacturer's warranty and are offered at competitive prices in the market. Rest assured, you can shop with complete confidence.

2010 Cadillac DTS Vehicle Speed Sensor Parts and Q&A

Q: How to replace the Vehicle Speed Sensor on 2010 Cadillac DTS?
A: Before replacing the Vehicle Speed Sensor you need to lift the vehicle. Take out the bolts 1 and 3 that attach the front transaxle brace to the transaxle and the right Cylinder Head. Pull off the Vehicle Speed Sensor (130) after disconnecting its electrical connector and removing bolt (131). Twist the sensor as you pull to assist the removal. Rephrase the following sentence considering the instructions below. An installation checklist includes connecting the Vehicle Speed Sensor (130) and fitting the retaining bolt (131) while replacing the seal when needed. Tighten the bolt to 10 nm (89 lb in). Attach the Vehicle Speed Sensor electrical connector and bolt down the two bolts (1, 3) at front transaxle brace while the vehicle is lowered.