How to replace the knock sensor on 2010 Cadillac DTS?

Starting the Knock Sensor replacement requires removing the Intake Manifold first. Remove electrical connecter operations from both right and left knock sensors whenever necessary. Separate the Knock Sensor while keeping in mind the cylinder heads require removal for visibility purposes. The installation process for the new Knock Sensor requires a torque of 25 nm (18 lb ft). Before reinstalling the Intake Manifold reconnect the electrical connector to both the left Knock Sensor and the electrical connector to both the right Knock Sensor if sensors are present.

OEM 2010 Cadillac DTS Knock Sensor

Engine Knock Sensor

Select Vehicle by Model
Select Vehicle by VIN

Select Vehicle by Model

Make

Model

Year

Select Vehicle by VIN

For the most accurate results, select vehicle by your VIN (Vehicle Identification Number).

1 Knock Sensor found

View related parts
2010 Cadillac DTS Knock Sensor
Part Number: 12623730
$13.47 MSRP: $25.30
You Save: $11.83 (47%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Sensor, Distributor (Also Knock Sensor); Ignition Knock (Detonation) Sensor
- Replaces: 12570125
- Item Weight: 0.50 Pounds
- Item Dimensions: 2.7 x 2.5 x 1.2 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 12623730
- Warranty: This genuine part is guaranteed by GM's factory warranty.
More Info
Fits the following 2010 Cadillac DTS Submodels:
- Base, Livery, Luxury, Platinum, Premium | 8 Cyl 4.6 L GAS

2010 Cadillac DTS Knock Sensor

With a comprehensive array of OEM 2010 Cadillac DTS Knock Sensor, from fuel pumps to door handles, our website is a one-stop-shop for your needs. All our genuine 2010 Cadillac DTS Knock Sensor are backed by the manufacturer's warranty and are offered at competitive prices in the market. Rest assured, you can shop with complete confidence.

2010 Cadillac DTS Parts Questions & Experts Answers

Q: How to replace the knock sensor on 2010 Cadillac DTS?
A: Starting the Knock Sensor replacement requires removing the Intake Manifold first. Remove electrical connecter operations from both right and left knock sensors whenever necessary. Separate the Knock Sensor while keeping in mind the cylinder heads require removal for visibility purposes. The installation process for the new Knock Sensor requires a torque of 25 nm (18 lb ft). Before reinstalling the Intake Manifold reconnect the electrical connector to both the left Knock Sensor and the electrical connector to both the right Knock Sensor if sensors are present.

Related 2010 Cadillac DTS Parts

Alternate Year Models

2009 Cadillac DTS Knock Sensor 2011 Cadillac DTS Knock Sensor