How to replace the water pump pulley on 2010 Cadillac DTS?

A mechanic must first let out tension on the outer water pump Drive Belt tensioner before removing the Drive Belt from the pulley. After removing the end cap from the intake Camshaft workers can employ the j 38825 (Power Steering and Water Pump Pulley Remover) to disassemble the water pump drive pulley from the Camshaft. The water pump drive pulley must be set onto the intake Camshaft before using the j 38823 tool to perform installation. The installer tool should rest at the correct pulley depth when it bottoms out on the Camshaft. Position the Camshaft end cap followed by tightening it to 2 nm torque setting. You must install the water pump Drive Belt as the last step.

OEM 2010 Cadillac DTS Water Pump Pulley

Engine Water Pump Pulley

Select Vehicle by Model
Select Vehicle by VIN

Select Vehicle by Model

Make

Model

Year

Select Vehicle by VIN

For the most accurate results, select vehicle by your VIN (Vehicle Identification Number).

1 Water Pump Pulley found

View related parts
2010 Cadillac DTS Pump Pulley
Part Number: 3535846
$105.75 MSRP: $111.96
You Save: $6.21 (6%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Pulley, Water Pump; Serpentine Belt Drive Kit; Water Pump Pulley; Pulley; Pulley, Fan And Coolant Pump
- Item Weight: 0.60 Pounds
- Item Dimensions: 5.2 x 5.3 x 1.0 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 3535846
- Warranty: This genuine part is guaranteed by GM's factory warranty.
More Info
Fits the following 2010 Cadillac DTS Submodels:
- Base, Livery, Luxury, Platinum, Premium | 8 Cyl 4.6 L GAS

2010 Cadillac DTS Water Pump Pulley

With a comprehensive array of OEM 2010 Cadillac DTS Water Pump Pulley, from fuel pumps to door handles, our website is a one-stop-shop for your needs. All our genuine 2010 Cadillac DTS Water Pump Pulley are backed by the manufacturer's warranty and are offered at competitive prices in the market. Rest assured, you can shop with complete confidence.

2010 Cadillac DTS Parts Questions & Experts Answers

Q: How to replace the water pump pulley on 2010 Cadillac DTS?
A: A mechanic must first let out tension on the outer water pump Drive Belt tensioner before removing the Drive Belt from the pulley. After removing the end cap from the intake Camshaft workers can employ the j 38825 (Power Steering and Water Pump Pulley Remover) to disassemble the water pump drive pulley from the Camshaft. The water pump drive pulley must be set onto the intake Camshaft before using the j 38823 tool to perform installation. The installer tool should rest at the correct pulley depth when it bottoms out on the Camshaft. Position the Camshaft end cap followed by tightening it to 2 nm torque setting. You must install the water pump Drive Belt as the last step.