Make sure this part fits

GM 3535846
Pump Pulley

1993-2011 GM

Customer Questions & Expert Answers (6)
GM 3535846 Pump Pulley
GM 3535846 Pump Pulley
  • Part Description
    Pulley, Water Pump; Serpentine Belt Drive Kit; Water Pump Pulley
  • Manufacturer
    General Motors
Make sure this part fits
$91.49 MSRP: $111.96
You Save: $20.47 (19%)
Ships in 1-2 Business Days
1
ADD TO CART
  • Vehicle Fitment

    Year Make Model Trim Engine
    2006-2011 Buick LucerneCXL, CXS, Super8 Cyl 4.6 L GAS
    1993 Cadillac AllanteBase, Indianapolis 500 Pace Car, Value Leader8 Cyl 4.6 L GAS
    2006-2011 Cadillac DTSBase, Livery, Luxury, Platinum, Premium8 Cyl 4.6 L GAS
    1994-2005 Cadillac DeVilleBase, Concours, d'Elegance, DHS, DTS, Protection Series8 Cyl 4.6 L GAS
    1993-2002 Cadillac EldoradoBase, ESC, ETC, Sport, Touring8 Cyl 4.6 L GAS
    1993-2004 Cadillac SevilleSLS, STS8 Cyl 4.6 L GAS
    2001-2003, 1995-1999 Oldsmobile AuroraBase8 Cyl 4.0 L GAS
    2004-2005 Pontiac BonnevilleGXP8 Cyl 4.6 L GAS
    Warning: California's Proposition 65
  • Customer Questions & Expert Answers

    Q:
    Is 3535846 compatible with my car? Posted by ChevyPartsGiant Specialist
    A:
    Please Select Your Vehicle model to see if part number 3535846 is suitable before ordering.
    Posted by ChevyPartsGiant Specialist
    Q:
    How to replace the water pump pulley on Cadillac DTS? Posted by Customer
    A:
    You need to free the outer water pump Drive Belt tensioner before taking off its Drive Belt and Water Pump Pulley. You can remove the end cap from the intake Camshaft with ease before utilizing the power steering and Water Pump Pulley remover (J 38825) to detach the water pump drive pulley from the intake Camshaft. Put the water pump drive pulley on the intake Camshaft then snap it into place using the Water Pump Pulley installer j 38823 until it hits the Camshaft at the right depth as indicated by the tool's lower edge. Install the Camshaft end cap and fasten it at 2 n.m (18 lb in). Then put the water pump Drive Belt into position.
    Posted by ChevyPartsGiant Specialist
    Q:
    How to Properly Install a Water Pump Pulley on Cadillac DTS? Posted by Customer
    A:
    You must start the replacement process of the Water Pump Pulley by removing the water pump drive belt tensioner shield. Installation begins with aligning the Crankshaft at top dead center (TDC) position through the use of Crankshaft socket (J39946). The power steering and Water Pump Pulley remover (J38825) should be used to detach the water pump drive pulley from the intake Camshaft after end cap removal. Install the water pump drive pulley onto the intake Camshaft with the Water Pump Pulley installer (J38823) until the tool reaches its proper depth at the Camshaft surface. Reinstall the Camshaft end cap while tightening it to 2 nm (18 inch lbs.) before you put on the water pump drive belt tensioner shield.
    Posted by ChevyPartsGiant Specialist
    Q:
    What is the final step in the process for the 2009 Cadillac DTS? Posted by Customer
    A:
    Install the water pump drive belt.
    Posted by ChevyPartsGiant Specialist
    See expert answers on similar Water Pump Pulley
    Q:
    What should be done after installing the water pump drive pulley for the 2010 Cadillac DTS? Posted by Customer
    A:
    Install the camshaft end cap and tighten it to 2 Nm (18 lb in).
    Posted by ChevyPartsGiant Specialist
    See expert answers on similar Water Pump Pulley
    Q:
    What is the next step after installing the pulley for the 2008 Cadillac DTS? Posted by Customer
    A:
    Install the camshaft end cap and tighten it to 2 N.m (18 lb in).
    Posted by ChevyPartsGiant Specialist
    See expert answers on similar Water Pump Pulley
    If you have any questions about this product, please don't hesitate to ask us. We will be happy to help you!

OEM GM Pump Pulley 3535846 Designed for Proper Fit and Performance

Original OEM GM parts deliver superior quality and meet all performance standards needed for optimal automotive operation. The authentic part identified by 3535846 Pump Pulley is available in the market under the name GM Water Pump Pulley. This genuine product has a full warranty coverage from the manufacturer available at all authorized GM dealers throughout the United States. This part 3535846 Pump Pulley fits certain Cadillac Allante, DTS, DeVille models, as well as Buick Lucerne. Additionally, it is compatible with Pontiac Bonneville and Oldsmobile Aurora models.
The original GM component designated by manufacturer part number 3535846 maintains top performance when functioning as the Pulley, Water Pump; Serpentine Belt Drive Kit; Water Pump Pulley unit. The component 3535846 is constructed from durable material and its dimensions span 5.2 x 5.3 x 1.0 inches while weighing 0.60 Pounds. The Direct Replacement component is ready in New condition to ensure full compatibility with your vehicle system. This component receives the designation of Pulley; Pulley, Fan And Coolant Pump. The part 3535846 has available replacement options. GM manufacturer provides a warranty that ensures reliable operation of this product. The Shipping Policy and Return Policy pages outline complete details regarding shipping procedures and return processes.
If you want to save money in the long run on maintenance and repairs, you should choose OEM products because they're of the top level of durability. Are you on the quest of finding GM parts, our site is worth a visit. We stock an endless selection of high-quality GM components including things like ignition coils all the way through to fan shrouds and all at prices that can not be matched. You have nothing to worry about because all our OEM parts are covered with a manufacturer warranty, which guarantees superior quality and value.