OEM 2010 Cadillac STS Battery Cable

Car Battery Cable
  • Select Vehicle by Model
  • Select Vehicle by VIN
Select Vehicle by Model
Make
Model
Year
or
Select Vehicle by VIN
For the most accurate results, select vehicle by your VIN (Vehicle Identification Number).

4 Battery Cables found

  • 2010 Cadillac STS Battery Cable Diagram - 22786599
    View related parts
    Product Specifications
    • Other Name: Cable Assembly-Battery Negative; Battery Cables; Ground Strap; Cable, Battery Ground(Negative)
    • Replaces: 25831926
    • Item Weight: 1.20 Pounds
    • Item Dimensions: 11.6 x 9.7 x 4.6 inches
    • Condition: New
    • Fitment Type: Direct Replacement
    • SKU: 22786599
    • Warranty: This genuine part is guaranteed by GM's factory warranty.
    More Info
    Fits the following 2010 Cadillac STS Submodels:
    • Base, Platinum | 6 Cyl 3.6 L GAS
  • 2010 Cadillac STS Battery Cable Diagram - 25831922
    View related parts
    Product Specifications
    • Other Name: Cable Assembly-Battery Positive; Battery Cables; Cable, Battery(Positive)
    • Item Weight: 3.10 Pounds
    • Item Dimensions: 4.0 x 12.5 x 10.2 inches
    • Condition: New
    • Fitment Type: Direct Replacement
    • SKU: 25831922
    • Warranty: This genuine part is guaranteed by GM's factory warranty.
    More Info
    Fits the following 2010 Cadillac STS Submodels:
    • Base, Platinum | 6 Cyl 3.6 L GAS
  • 2010 Cadillac STS Battery Cable - 25831921
    2010 Cadillac STS Battery Cable Diagram - 25831921
    View related parts
    Product Specifications
    • Other Name: Cable Assembly-Battery Positive; Battery Cables; Cable, Battery(Positive)
    • Replaces: 25788166
    • Item Weight: 2.40 Pounds
    • Item Dimensions: 12.0 x 9.6 x 4.6 inches
    • Condition: New
    • Fitment Type: Direct Replacement
    • SKU: 25831921
    • Warranty: This genuine part is guaranteed by GM's factory warranty.
    More Info
    Fits the following 2010 Cadillac STS Submodels:
    • Base, Platinum | 8 Cyl 4.6 L GAS
  • 2010 Cadillac STS Battery Cable - 25831929
    2010 Cadillac STS Battery Cable Diagram - 25831929
    View related parts
    Product Specifications
    • Other Name: Cable Assembly-Battery Negative; Battery Cables; Ground Strap; Cable, Battery Ground(Negative)
    • Item Weight: 2.30 Pounds
    • Item Dimensions: 4.2 x 12.5 x 10.4 inches
    • Condition: New
    • Fitment Type: Direct Replacement
    • SKU: 25831929
    • Warranty: This genuine part is guaranteed by GM's factory warranty.
    More Info
    Fits the following 2010 Cadillac STS Submodels:
    • Base, Platinum, V | 8 Cyl 4.4 L GAS, 8 Cyl 4.6 L GAS

2010 Cadillac STS Battery Cable

With a comprehensive array of OEM 2010 Cadillac STS Battery Cable, from fuel pumps to door handles, our website is a one-stop-shop for your needs. All our genuine 2010 Cadillac STS Battery Cable are backed by the manufacturer's warranty and are offered at competitive prices in the market. Rest assured, you can shop with complete confidence.

2010 Cadillac STS Battery Cable Parts and Q&A

  • Q: How to disconnect the negative battery cable and calibrate the power sunroof, power windows, and heat and A/C control head on 2010 Cadillac STS?
    A: In order to disconnect the battery negative cable from the battery, one is to turn off all lamps and accessories, and ensure that the ignition is off. Having disconnected, reconnect the negative cable to the battery and tighten it to 17 nm (13 lb ft). Power sunroof calibration: switch the Ignition Switch to run, close off the sunroof through the switch. After it has closed completely and the motor ceases, press and hold the switch for 3 seconds to lock it. Next, tilt the sunroof then hold for 3 seconds after it's stops, open it until it's completely opened and then hold for 3 seconds after it stops and close it for the final time holding it for 3 seconds after stop. For doing the calibration of power windows, turn on the Ignition Switch is on run and push down power windows switch. Hold it for 3 seconds while at full down, then press the switch up and hold it for 3 more seconds while at full up, doing the same for each window. For the heat and a/c control head calibration, set the Ignition Switch to the run position and press the auto and off buttons from the heat and at a/c control head at the same time for more than 5 seconds, this will allow the stepper motors to cycle. If needed, relearn the tire pressure sensor system.

Related 2010 Cadillac STS Parts