Menu
×
Search Bar
Search by Part Number, Part Name, or Vehicle
My Garage
Cart
Help Center Contact Us

OEM 2010 Cadillac STS Fuel Level Sensor

Gas Gauge Sensor
  • Select Vehicle by Model
  • Select Vehicle by VIN
Select Vehicle by Model
Make
Model
Year
or
Select Vehicle by VIN
For the most accurate results, select vehicle by your VIN (Vehicle Identification Number).

1 Fuel Level Sensor found

  • 2010 Cadillac STS Fuel Level Sensor - 19151151
    2010 Cadillac STS Fuel Level Sensor Diagram - 19151151
    View related parts

    2010 Cadillac STS Fuel Gauge Sending Unit

    Part Number: 19151151
    Product Specifications
    • Other Name: Sensor Kit, Fuel Tank Meter/Pump; Fuel Level Sensor; Fuel Sending Unit
    • Item Weight: 1.30 Pounds
    • Item Dimensions: 7.3 x 5.3 x 10.2 inches
    • Condition: New
    • Fitment Type: Direct Replacement
    • SKU: 19151151
    • Warranty: This genuine part is guaranteed by GM's factory warranty.
    More Info
    Fits the following 2010 Cadillac STS Submodels:
    • Base, Platinum, V | 6 Cyl 3.6 L GAS, 8 Cyl 4.4 L GAS, 8 Cyl 4.6 L GAS

2010 Cadillac STS Fuel Level Sensor

With a comprehensive array of OEM 2010 Cadillac STS Fuel Level Sensor, from fuel pumps to door handles, our website is a one-stop-shop for your needs. All our genuine 2010 Cadillac STS Fuel Level Sensor are backed by the manufacturer's warranty and are offered at competitive prices in the market. Rest assured, you can shop with complete confidence.

2010 Cadillac STS Parts Questions & Experts Answers

  • Q: How to replace the Primary Fuel Level Sensor on 2010 Cadillac STS?
    A: The replacement of the primary fuel level sensor needs technicians to start by removing the primary fuel tank module while being cautious to avoid pulling on the connector wires. Before removal disconnect the fuel level sensor electrical connector by pressing its locking tab while ensuring the resistor circuit board remains untouched. Press the fuel level sensor locking tab inward to disengage it before elevating the sensor until the lock stops and removing it from the assembly. Install the new fuel level sensor by avoiding electrical terminals yet pulling it downward until the locking tab clicks into place and verifies that the connector tab locks firmly into the flange. Connect the fuel level sensor electrical connector before putting back the primary fuel tank module.

Related 2010 Cadillac STS Parts

Alternate Year Models

+
2009 Cadillac STS Fuel Level Sensor 2011 Cadillac STS Fuel Level Sensor