How to replace the brake master cylinder on 2010 Chevrolet Aveo?

First start by removing the electrical connector at the reservoir end. To remove brake lines safely disconnect either the abs body lines or non-abs proportioning valves depending on the vehicle model. When replacing a manual transaxle master cylinder you must take off its connection to the clutch hose at this location. Institute fluid retention by plugging brake lines before loosening the power booster nuts and taking out the entire unit. Take out both parts of the booster housing seal and empty out brake fluid from the system. During installation put new fasteners on the master cylinder assembly and apply a new seal to the booster housing. Tighten the master cylinder nuts to 18 nm (13 lb ft). Connect abs brake lines right to the cylinder while non-abs systems need to connect to the proportioning valves and tighten them to 16 nm (12 lb ft). Push the clip back onto the clutch hose connection where necessary. At the same time attach the electrical connector at the reservoir end. Update brake fluid supply then test for leaks while verifying the fluid level and removing pressure from the brake system.

OEM 2010 Chevrolet Aveo Brake Master Cylinder

Select Vehicle by Model
Select Vehicle by VIN

Select Vehicle by Model

Make

Model

Year

Select Vehicle by VIN

For the most accurate results, select vehicle by your VIN (Vehicle Identification Number).

6 Brake Master Cylinders found

View related parts
2010 Chevrolet Aveo Booster Assembly
Part Number: 95983238
$197.85 MSRP: $358.09
You Save: $160.24 (45%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Booster, Hydraulic Power Brake Booster; Cylinder, Brake Master Cylinder; Brake Booster
- Replaces: 96652675
- Item Weight: 8.70 Pounds
- Item Dimensions: 13.3 x 13.5 x 11.7 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 95983238
- Warranty: This genuine part is guaranteed by GM's factory warranty.
More Info
Fits the following 2010 Chevrolet Aveo Submodels:
- LS, LT | 4 Cyl 1.6 L GAS
View related parts
2010 Chevrolet Aveo Master Cylinder
Part Number: 93744982
Product Specifications
- Other Name: Cylinder, Brake Master Cylinder; Brake Master Cylinder
- Item Weight: 7.70 Pounds
- Item Dimensions: 8.4 x 7.4 x 10.6 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 93744982
- Warranty: This genuine part is guaranteed by GM's factory warranty.
More Info
Fits the following 2010 Chevrolet Aveo Submodels:
- LS, LT | 4 Cyl 1.6 L GAS
View related parts
2010 Chevrolet Aveo Booster Assembly
Part Number: 95983229
Product Specifications
- Other Name: Booster, Hydraulic Power Brake Booster; Cylinder, Brake Master Cylinder; Brake Booster
- Replaces: 96652683
- Item Weight: 8.60 Pounds
- Item Dimensions: 14.8 x 13.3 x 11.3 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 95983229
- Warranty: This genuine part is guaranteed by GM's factory warranty.
More Info
Fits the following 2010 Chevrolet Aveo Submodels:
- LS, LT | 4 Cyl 1.6 L GAS
View related parts
2010 Chevrolet Aveo Master Cylinder
Part Number: 93744983
Product Specifications
- Other Name: Cylinder, Brake Master Cylinder; Brake Master Cylinder
- Item Weight: 7.60 Pounds
- Item Dimensions: 8.4 x 7.3 x 10.3 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 93744983
- Warranty: This genuine part is guaranteed by GM's factory warranty.
More Info
Fits the following 2010 Chevrolet Aveo Submodels:
- LS, LT | 4 Cyl 1.6 L GAS
View related parts
2010 Chevrolet Aveo Master Cylinder
Part Number: 93744985
Product Specifications
- Other Name: Cylinder, Brake Master Cylinder; Brake Master Cylinder
- Item Weight: 7.70 Pounds
- Item Dimensions: 8.4 x 7.1 x 10.3 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 93744985
- Warranty: This genuine part is guaranteed by GM's factory warranty.
More Info
Fits the following 2010 Chevrolet Aveo Submodels:
- LS, LT | 4 Cyl 1.6 L GAS
View related parts
2010 Chevrolet Aveo Master Cylinder
Part Number: 93744984
Product Specifications
- Other Name: Cylinder, Brake Master Cylinder; Brake Master Cylinder
- Item Weight: 7.50 Pounds
- Item Dimensions: 8.4 x 7.3 x 10.1 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 93744984
- Warranty: This genuine part is guaranteed by GM's factory warranty.
More Info
Fits the following 2010 Chevrolet Aveo Submodels:
- LS, LT | 4 Cyl 1.6 L GAS

2010 Chevrolet Aveo Brake Master Cylinder

With a comprehensive array of OEM 2010 Chevrolet Aveo Brake Master Cylinder, from fuel pumps to door handles, our website is a one-stop-shop for your needs. All our genuine 2010 Chevrolet Aveo Brake Master Cylinder are backed by the manufacturer's warranty and are offered at competitive prices in the market. Rest assured, you can shop with complete confidence.

2010 Chevrolet Aveo Parts Questions & Experts Answers

Q: How to replace the brake master cylinder on 2010 Chevrolet Aveo?
A: First start by removing the electrical connector at the reservoir end. To remove brake lines safely disconnect either the abs body lines or non-abs proportioning valves depending on the vehicle model. When replacing a manual transaxle master cylinder you must take off its connection to the clutch hose at this location. Institute fluid retention by plugging brake lines before loosening the power booster nuts and taking out the entire unit. Take out both parts of the booster housing seal and empty out brake fluid from the system. During installation put new fasteners on the master cylinder assembly and apply a new seal to the booster housing. Tighten the master cylinder nuts to 18 nm (13 lb ft). Connect abs brake lines right to the cylinder while non-abs systems need to connect to the proportioning valves and tighten them to 16 nm (12 lb ft). Push the clip back onto the clutch hose connection where necessary. At the same time attach the electrical connector at the reservoir end. Update brake fluid supply then test for leaks while verifying the fluid level and removing pressure from the brake system.