OEM 2010 Chevrolet Cobalt Clutch Master Cylinder

2010 Chevrolet Cobalt Clutch Master Cylinder Parts Questions & Experts Answers

• Q: How to replace the Clutch Master Cylinder (M86) on 2010 Chevrolet Cobalt?

  A: First disconnect the clutch pedal retainer on the front of the assembly then pull the clutch pedal upward until the Pushrod disengages from the pedal. Wipe away the ubec before its removal while using caution to shield painted surfaces and electrical components from brake fluid exposure. A shop towel positioned below the Clutch Master Cylinder should collect fluid while you disconnect both the Clutch Hose and clutch line connected to the cylinder. First cap the hydraulic lines to avoid loss of fluid and contamination before you turn the master cylinder by 1/4 turn clockwise for removal from the vehicle. To install the Clutch Master Cylinder just match the Pushrod to the clutch pedal followed by Clutch Master Cylinder installation using a 1/4 counterclockwise turn. Connect the clutch line along with Clutch Hose into the cylinder after you remove the tank caps for reservoir and hydraulic lines. Progress by installing the new ubec followed by a Pushrod connection to the clutch pedal before reinstalling the clutch pedal retainer. The clutch hydraulic system needs bleeding to finish up the installation procedure.