OEM 2010 Chevrolet Corvette Hood Cable

2010 Chevrolet Corvette Hood Cable Parts Questions & Experts Answers

• Q: How to replace the Hood Cable for the Primary Latch Release on 2010 Chevrolet Corvette?

  A: To replace the hood primary latch cable, first: raise the vehicle and remove the front wheelhouse rear filler panel so that the Hood Latch becomes accessible then trip the latch with a long screwdriver. Start by unscrewing the right and left hood latches, then releasing the cable from the latches. Reposition the cables and see that they slide smoothly into the opening of the dash panel, before uninstalling the screws of the cable handle and the cable of the grommet from the dash panel. Pull the cables within the opening in the dash panel. For installation, pass the cables through dash panel and locate the latch handle. Screw the screws that attach the hood handle, to the value of 2 nm (18 lb in). Please install the grommet into the slits in the carpet insulator and into the dash panel, and connect the cables to the latches and install the hood latches. Lastly, test for the operation of latches.