How to replace the Hood Cable for the Primary Latch Release on Chevrolet Corvette?

To remove the hood primary latch release cable, lift the vehicle and remove the front wheelhouse rear filler panel to reach the latch in case the Hood Cable is inoperative. Push the latch off with a long screwdriver then remove the right and the left hood latches then pull out the Hood Cable from them. Then, unplug the Hood Cable from the retainers on the plenum panel and reposition the cables so they slide nicely through the opening in the dash panel. Take the cockscrew with which you release the screw within the Hood Cable handle, go ahead and take it off, then the one underneath the surface in the dash panel take also and end up with the hood cables on through the exit on it. For the installation run the cables through the dash panel opening and through the retainers on the plenum panel and connect to the latches. Position the latch handle and fix it to the door by inserting the screws tighten to 2 n.m (18 lb in). Insert the cable grommet through the slits of the carpet insulator into the dash panel and then install the latches and tightening the mounting bolts to the key of 10 n.m (89 lb in). Finally, connect the Hood Cable into the retainers and test the latches functionality.

OEM Chevrolet Corvette Hood Cable

Hood Release Cable

Select Vehicle by Model
Select Vehicle by VIN

Select Vehicle by Model

Make

Model

Year

Select Vehicle by VIN

For the most accurate results, select vehicle by your VIN (Vehicle Identification Number).

5 Hood Cables found

View related parts
Chevrolet Corvette Release Cable
Part Number: 15209368
$47.61 MSRP: $70.86
You Save: $23.25 (33%)
Ships in 1-3 Business Days
ADD TO CART
Product Specifications
- Other Name: Cable, Hood Latch; Hood Release Cable
- Warranty: This genuine part is guaranteed by GM's factory warranty.
Fits the following Vehicles:
- 2005-2013 Chevrolet Corvette | 427, 427 Limited Edition Z06, Base, Grand Sport, Z06, Z06 Carbon, ZR1 | 8 Cyl 6.0 L GAS, 8 Cyl 6.2 L GAS, 8 Cyl 7.0 L GAS
View related parts
Chevrolet Corvette Release Cable
Part Number: 10250486
Product Specifications
- Other Name: Cable, Hood Latch; Hood Release Cable
- Warranty: This genuine part is guaranteed by GM's factory warranty.
Fits the following Vehicles:
- 1984-1996 Chevrolet Corvette | 35th Anniversary Edition, 40th Anniversary Edition, Base, Collector's Edition, Grand Sport, Indianapolis 500 Pace Car, ZR-1 | 8 Cyl 5.7 L GAS
View related parts
Chevrolet Corvette Release Handle
Part Number: 10286183
$42.57 MSRP: $63.36
You Save: $20.79 (33%)
Product Specifications
- Other Name: Handle, Hood Latch; Handle
- Warranty: This genuine part is guaranteed by GM's factory warranty.
Fits the following Vehicles:
- 1984-1996 Chevrolet Corvette | 35th Anniversary Edition, 40th Anniversary Edition, Base, Collector's Edition, Grand Sport, Indianapolis 500 Pace Car, ZR-1 | 8 Cyl 5.7 L GAS
View related parts
Chevrolet Corvette Release Cable
Part Number: 23289423
Product Specifications
- Other Name: Cable Assembly-Hood Primary Latch Release *Ebony; Hood Release Cable; Cable, Hood Latch
- Replaces: 22912722, 23494257
- Warranty: This genuine part is guaranteed by GM's factory warranty.
Fits the following Vehicles:
- 2014-2019 Chevrolet Corvette | Grand Sport, Stingray, Z06, ZR1 | 8 Cyl 6.2 L GAS
View related parts
Chevrolet Corvette Release Cable
Part Number: 10411704
Product Specifications
- Other Name: Cable, Hood Latch; Hood Release Cable
- Warranty: This genuine part is guaranteed by GM's factory warranty.
Fits the following Vehicles:
- 1997-2004 Chevrolet Corvette | 50th Anniversary Edition, 50th Anniversary Edition Pace Car, Base, Indianapolis 500 Pace Car, Z06 | 8 Cyl 5.7 L GAS

Chevrolet Corvette Hood Cable

Our website offers an extensive catalog of genuine Chevrolet Corvette Hood Cable at unbeatable prices. Every OEM Chevrolet Corvette Hood Cable comes with a manufacturer's warranty, an easy return policy, and rapid delivery service. Don't miss out on this great opportunity!

Chevrolet Corvette Hood Cable Parts Questions & Experts Answers

Release Cable
10411704
Q: How to replace the Hood Cable for the Primary Latch Release on Chevrolet Corvette?
A: To remove the hood primary latch release cable, lift the vehicle and remove the front wheelhouse rear filler panel to reach the latch in case the Hood Cable is inoperative. Push the latch off with a long screwdriver then remove the right and the left Hood Latches then pull out the Hood Cable from them. Then, unplug the Hood Cable from the retainers on the plenum panel and reposition the cables so they slide nicely through the opening in the dash panel. Take the cockscrew with which you release the screw within the Hood Cable handle, go ahead and take it off, then the one underneath the surface in the dash panel take also and end up with the hood cables on through the exit on it. For the installation run the cables through the dash panel opening and through the retainers on the plenum panel and connect to the latches. Position the latch handle and fix it to the door by inserting the screws tighten to 2 n.m (18 lb in). Insert the cable grommet through the slits of the carpet insulator into the dash panel and then install the latches and tightening the mounting bolts to the key of 10 n.m (89 lb in). Finally, connect the Hood Cable into the retainers and test the latches functionality.