Warranty: This genuine part is guaranteed by GM's
factory warranty.
Fits the following Vehicles:
1997-2013 Chevrolet Corvette | 427, 427 Limited Edition Z06, 50th Anniversary Edition, 50th Anniversary Edition Pace Car, Base, Grand Sport, Indianapolis 500 Pace Car, Z06, Z06 Carbon, ZR1 | 8 Cyl 5.7 L GAS, 8 Cyl 6.0 L GAS, 8 Cyl 6.2 L GAS, 8 Cyl 7.0 L GAS
Warranty: This genuine part is guaranteed by GM's
factory warranty.
Fits the following Vehicles:
1997-2013 Chevrolet Corvette | 427, 427 Limited Edition Z06, 50th Anniversary Edition, 50th Anniversary Edition Pace Car, Base, Grand Sport, Indianapolis 500 Pace Car, Z06, Z06 Carbon, ZR1 | 8 Cyl 5.7 L GAS, 8 Cyl 6.0 L GAS, 8 Cyl 6.2 L GAS, 8 Cyl 7.0 L GAS
Warranty: This genuine part is guaranteed by GM's
factory warranty.
Fits the following Vehicles:
1992-1996 Chevrolet Corvette | 40th Anniversary Edition, Base, Collector's Edition, Grand Sport, Indianapolis 500 Pace Car, ZR-1 | 8 Cyl 5.7 L GAS
Chevrolet Corvette Hood Latch
Our website offers an extensive catalog of genuine Chevrolet Corvette Hood Latch at unbeatable prices. Every OEM Chevrolet Corvette Hood Latch comes with a manufacturer's warranty, an easy return policy, and rapid delivery service. Don't miss out on this great opportunity!
Chevrolet Corvette Hood Latch Parts Questions & Experts Answers
Q: How to replace the Hood Latch on the left side on Chevrolet Corvette?
A: The first step to replace the hood primary and secondary latch on the left side involves removing the plenum air inlet screen. The first step is to pencil-mark the latch edges before removing the bolts that maintain the latch position. Start by unfastening the cable sheath to wheelhouse panel push-in retainer and disconnect the cable sheath grommet from the latch to free the cable end from the latch. To put the hood latch in position start by placing the cable end inside the catch then position the cable sheath grommet into the slotted hole of the latch. The hood latch should receive installation together with its attaching bolts while maintaining its position in the marked area. Once the hood latch bolts are tightened to 10 N.m (89 lb in), you can proceed with reconnecting the cable sheath to the push-in retainer and reinstalling the plenum air inlet screen.