ChevyParts
My Garage
My Account
Cart
OEM 2010 Chevrolet Corvette Radiator
Cooling Radiator- Select Vehicle by Model
- Select Vehicle by VIN
Select Vehicle by Model
orMake
Model
Year
Select Vehicle by VIN
For the most accurate results, select vehicle by your VIN (Vehicle Identification Number).
5 Radiators found
Product Specifications- Other Name: Radiator Assembly; Radiator, Radiator
- Item Weight: 8.00 Pounds
- Item Dimensions: 35.2 x 6.7 x 25.1 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 15145946
- Warranty: This genuine part is guaranteed by GM's factory warranty.
2010 Chevrolet Corvette Radiator Assembly
Part Number: 21996495$273.71 MSRP: $409.13You Save: $135.42 (34%)Product Specifications- Other Name: Radiator; Radiator, Radiator
- Replaces: 10309963
- Item Weight: 17.10 Pounds
- Item Dimensions: 37.1 x 31.2 x 6.2 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 21996495
- Warranty: This genuine part is guaranteed by GM's factory warranty.
Product Specifications- Other Name: Radiator Assembly; Radiator, Radiator
- Item Weight: 10.90 Pounds
- Item Dimensions: 35.2 x 6.5 x 25.3 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 10353890
- Warranty: This genuine part is guaranteed by GM's factory warranty.
Product Specifications- Other Name: Radiator Assembly-Charging Air Cooler; Radiator, Turbocharger/Supercharger Cooling
- Replaces: 15870557
- Item Weight: 3.30 Pounds
- Item Dimensions: 35.6 x 9.9 x 5.8 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 20759871
- Warranty: This genuine part is guaranteed by GM's factory warranty.
Product Specifications- Other Name: Radiator Assembly; Radiator, Radiator
- Item Weight: 14.40 Pounds
- Item Dimensions: 7.4 x 43.4 x 39.5 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 25999103
- Warranty: This genuine part is guaranteed by GM's factory warranty.
2010 Chevrolet Corvette Radiator
With a comprehensive array of OEM 2010 Chevrolet Corvette Radiator, from fuel pumps to door handles, our website is a one-stop-shop for your needs. All our genuine 2010 Chevrolet Corvette Radiator are backed by the manufacturer's warranty and are offered at competitive prices in the market. Rest assured, you can shop with complete confidence.
2010 Chevrolet Corvette Radiator Parts Questions & Experts Answers
- Q: How to replace the radiator on 2010 Chevrolet Corvette?A: Refrigerant recovery from the a/c system followed by draining of the cooling system represents the beginning of Radiator replacement. You should disconnect the inlet hose by using j 38185 - hose clamp pliers to release the clamp tension followed by removing the condenser. Lift the cooling fan and shroud assembly until the tabs become free of the Radiator slots and then take out the assembly. The technician must first disengage tension from the surge tank inlet hose clamp before disconnecting the inlet hose. Maintenance professionals must disconnect the upper transmission oil cooler lines from radiators when these systems exist in the vehicle while they disconnect the upper engine oil cooler lines for vehicles with this system. Utilize j 38185 - hose clamp pliers to eliminate the tension on the Radiator outlet hose clamp before disconnecting the outlet hose. Other vehicles need the lower transmission oil cooler line disconnected if they have this feature but those with an engine oil cooler require the lower engine oil cooler line to be disconnected. The Radiator should be taken out of the vehicle. Start by placing the new Radiator into the vehicle while the vehicle is once again raised to install the unit. Operators should connect the lower engine oil cooler line on vehicles that have this component active. Motorcars with a transmission oil cooler require the connection of this specific line. Attach the outlet hose of the Radiator before tightening its clamp with proper tension. Attach the upper transmission oil cooler line and upper engine oil cooler line to the vehicle according to the specifications. The inlet hose should be connected to the surge tank while using j-38185 hose clamp pliers to secure an appropriate clamp tension. Position the cooling fan assembly together with shroud components then connect the Radiator inlet hose before clamping it with j 38185 - hose clamp pliers. The technician must reinstall the condenser before filling the cooling system while using j 39400-a - halogen leak detector for a leak test of the fittings. The a/c system requires evacuation and recharging during this process. Check the transmission fluid amount as the last step.
Related 2010 Chevrolet Corvette Parts
2010 Chevrolet Corvette Coolant Reservoir
2010 Chevrolet Corvette Coolant Reservoir Cap
2010 Chevrolet Corvette Cooling Hose
2010 Chevrolet Corvette Fan Blade
2010 Chevrolet Corvette Intercooler
2010 Chevrolet Corvette Oil Cooler Hose
2010 Chevrolet Corvette Radiator Hose
2010 Chevrolet Corvette Radiator fan
2010 Chevrolet Corvette Thermostat Gasket
2010 Chevrolet Corvette Water Pump
2010 Chevrolet Corvette Water Pump Gasket
2010 Chevrolet Corvette Water Pump Pulley