How to replace the Engine Oil Cooler Hose/Pipe on 2010 Chevrolet Corvette?

Firstly, before starting the process of replacing, install an oil drain pan below the vehicle. Remove the engine Oil Cooler Hose/pipe f rom the Radiator, then remove the engine Oil Cooler Hose/pipe cl ip from the Fan Shroud. Finally remove the bolt that fastens the engine Oil Cooler Hose/pipe assembly to the engine block removal follows the bolt fastening the engine Oil Cooler Hose/pipe to the oil filter housing. Then remove the engine Oil Cooler Hose/pipe assembly from the vehicle discarding all engine Oil Cooler Hose/pipe seals. For installation, first install new engine Oil Cooler Hose/pipe seals and install the engine Oil Cooler Hose/pipe assembly back in vehicle. Secure the engine Oil Cooler Hose/pipe to the oil filter housing bolts installing and tighten, 12 nm (106 lb.in) and install the bolt and tighten, 25 nm (18 lb ft) fasten to the engine block. Reject the oil drain pan from the bottom part of the car, make sure that the quick connector fitting is pulled to some distance and pulled back to assure correlation connection. Lastly, fit the engine Oil Cooler Hose/pipes onto the Radiator and mount the engine Oil Cooler Hose/pipe clip onto the Fan Shroud and before refilling the engine oil.

OEM 2010 Chevrolet Corvette Oil Cooler Hose

Oil Cooler Line

Select Vehicle by Model
Select Vehicle by VIN

Select Vehicle by Model

Make

Model

Year

Select Vehicle by VIN

For the most accurate results, select vehicle by your VIN (Vehicle Identification Number).

4 Oil Cooler Hoses found

View related parts
2010 Chevrolet Corvette Oil Cooler Pipe
Part Number: 15848590
$179.40 MSRP: $282.25
You Save: $102.85 (37%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Hose Assembly-Engine Oil Cooler Inlet & Outlet; Hose, Engine Oil Cooler
- Replaces: 20842845
- Item Weight: 2.30 Pounds
- Item Dimensions: 8.2 x 44.7 x 12.4 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 15848590
- Warranty: This genuine part is guaranteed by GM's factory warranty.
More Info
Fits the following 2010 Chevrolet Corvette Submodels:
- 427, 427 Limited Edition Z06, Base, Grand Sport, Z06, Z06 Carbon | 8 Cyl 6.2 L GAS, 8 Cyl 7.0 L GAS
View related parts
2010 Chevrolet Corvette Upper Hose
Part Number: 15870518
$46.27 MSRP: $76.27
You Save: $30.00 (40%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Hose Assembly-Engine Oil Cooler Coolant Inlet; Hose, Engine Oil Cooler
- Item Weight: 0.70 Pounds
- Item Dimensions: 6.1 x 5.1 x 11.4 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 15870518
- Warranty: This genuine part is guaranteed by GM's factory warranty.
More Info
Fits the following 2010 Chevrolet Corvette Submodels:
- 427, Z06, Z06 Carbon, ZR1 | 8 Cyl 6.2 L GAS, 8 Cyl 7.0 L GAS
View related parts
2010 Chevrolet Corvette Outlet Hose
Part Number: 20883811
$117.39 MSRP: $157.47
You Save: $40.08 (26%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Hose Assembly-Auxiliary Engine Oil Tank Outlet
- Replaced by: 15210117
- Item Weight: 1.30 Pounds
- Item Dimensions: 27.5 x 2.0 x 2.1 inches
- Condition: New
- SKU: 20883811
- Warranty: This genuine part is guaranteed by GM's factory warranty.
More Info
Fits the following 2010 Chevrolet Corvette Submodels:
- 427, 427 Limited Edition Z06, Base, Grand Sport, Z06, Z06 Carbon, ZR1 | 8 Cyl 6.2 L GAS, 8 Cyl 7.0 L GAS
View related parts
2010 Chevrolet Corvette Inlet Hose
Part Number: 20883812
$126.00 MSRP: $200.08
You Save: $74.08 (38%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Hose Assembly-Auxiliary Engine Oil Tank Inlet
- Replaced by: 15210122
- Item Weight: 1.30 Pounds
- Item Dimensions: 4.1 x 28.6 x 2.0 inches
- Condition: New
- SKU: 20883812
- Warranty: This genuine part is guaranteed by GM's factory warranty.
More Info
Fits the following 2010 Chevrolet Corvette Submodels:
- 427, 427 Limited Edition Z06, Base, Grand Sport, Z06, Z06 Carbon, ZR1 | 8 Cyl 6.2 L GAS, 8 Cyl 7.0 L GAS

2010 Chevrolet Corvette Oil Cooler Hose

With a comprehensive array of OEM 2010 Chevrolet Corvette Oil Cooler Hose, from fuel pumps to door handles, our website is a one-stop-shop for your needs. All our genuine 2010 Chevrolet Corvette Oil Cooler Hose are backed by the manufacturer's warranty and are offered at competitive prices in the market. Rest assured, you can shop with complete confidence.

2010 Chevrolet Corvette Oil Cooler Hose Parts Questions & Experts Answers

Q: How to replace the Engine Oil Cooler Hose/Pipe on 2010 Chevrolet Corvette?
A: Firstly, before starting the process of replacing, install an oil drain pan below the vehicle. Remove the engine Oil Cooler Hose/pipe f rom the Radiator, then remove the engine Oil Cooler Hose/pipe cl ip from the Fan Shroud. Finally remove the bolt that fastens the engine Oil Cooler Hose/pipe assembly to the engine block removal follows the bolt fastening the engine Oil Cooler Hose/pipe to the oil filter housing. Then remove the engine Oil Cooler Hose/pipe assembly from the vehicle discarding all engine Oil Cooler Hose/pipe seals. For installation, first install new engine Oil Cooler Hose/pipe seals and install the engine Oil Cooler Hose/pipe assembly back in vehicle. Secure the engine Oil Cooler Hose/pipe to the oil filter housing bolts installing and tighten, 12 nm (106 lb.in) and install the bolt and tighten, 25 nm (18 lb ft) fasten to the engine block. Reject the oil drain pan from the bottom part of the car, make sure that the quick connector fitting is pulled to some distance and pulled back to assure correlation connection. Lastly, fit the engine Oil Cooler Hose/pipes onto the Radiator and mount the engine Oil Cooler Hose/pipe clip onto the Fan Shroud and before refilling the engine oil.