How to replace the Engine Oil Cooler Hose/Pipe on Chevrolet Corvette?

Firstly, before starting the process of replacing, install an oil drain pan below the vehicle. Remove the engine Oil Cooler Hose/pipe f rom the Radiator, then remove the engine Oil Cooler Hose/pipe cl ip from the Fan Shroud. Finally remove the bolt that fastens the engine Oil Cooler Hose/pipe assembly to the engine block removal follows the bolt fastening the engine Oil Cooler Hose/pipe to the oil filter housing. Then remove the engine Oil Cooler Hose/pipe assembly from the vehicle discarding all engine Oil Cooler Hose/pipe seals. For installation, first install new engine Oil Cooler Hose/pipe seals and install the engine Oil Cooler Hose/pipe assembly back in vehicle. Secure the engine Oil Cooler Hose/pipe to the oil filter housing bolts installing and tighten, 12 nm (106 lb.in) and install the bolt and tighten, 25 nm (18 lb ft) fasten to the engine block. Reject the oil drain pan from the bottom part of the car, make sure that the quick connector fitting is pulled to some distance and pulled back to assure correlation connection. Lastly, fit the engine Oil Cooler Hose/pipes onto the Radiator and mount the engine Oil Cooler Hose/pipe clip onto the Fan Shroud and before refilling the engine oil.

How to Change the Oil Cooler Hose Without Using KPS on a Chevrolet Corvette?

The replacement process of the engine Oil Cooler Hose/pipe begins by installing a pan for draining oil underneath the car. The left Catalytic Converter and left fender liner must be removed for the operation. Before proceeding disconnect the engine Oil Cooler Hose/pipe from its position on the external oil cooler and remove its clip from the Fan Shroud. You need to take out the bolt connecting the engine Oil Cooler Hose/pipe assembly to the engine block then remove the bolts connecting it to the oil filter housing. Extraction of these components allows removal of the engine Oil Cooler Hose/pipe assembly where all seals must be discarded. Installation begins with new engine Oil Cooler Hose/pipe seals before you attach the engine Oil Cooler Hose/pipe assembly to the vehicle. Begin by securing the hose/pipe to the oil filter housing with bolts while tightening them to 12 n.m (106 lb in). Proceed to tighten the engine block bolt to 25 n.m (18 lb ft). Check that the quick connect fitting maintains its secure position after placement by pushing it directly onto its spot and pulling it to engage safely. Mount the engine Oil Cooler Hose/pipes to the external oil cooler before reattaching the engine Oil Cooler Hose/pipe clip to the Fan Shroud. In the last step you should replace the left fender liner and left Catalytic Converter before adding new oil to the engine and testing for leaks.

OEM Chevrolet Corvette Oil Cooler Hose

Oil Cooler Line

Select Vehicle by Model
Select Vehicle by VIN

Select Vehicle by Model

Make

Model

Year

Select Vehicle by VIN

For the most accurate results, select vehicle by your VIN (Vehicle Identification Number).

29 Oil Cooler Hoses found

View related parts
Chevrolet Corvette Cooler Pipe Part Number: 84180422
$53.25 MSRP: $83.33
You Save: $30.08 (37%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Pipe Assembly-Transmission Fluid Auxiliary Cooler Inlet; Transmission Oil Cooler Line; Pipe, Transmission Oil Cooler; Pipe, Radiator Inlet (Upper)
- Replaces: 23264681, 23307983
- Warranty: This genuine part is guaranteed by GM's factory warranty.
Fits the following Vehicles:
- 2015-2019 Chevrolet Corvette | Grand Sport, Stingray, Z06, ZR1 | 8 Cyl 6.2 L GAS
View related parts
Chevrolet Corvette Outlet Hose Part Number: 84214924
$90.54 MSRP: $141.81
You Save: $51.27 (37%)
Ships in 1-3 Business Days
ADD TO CART
Product Specifications
- Other Name: Hose Assembly-Engine Oil Cooler Coolant Outlet; Oil Cooler Hose; Hose, Engine Oil Cooler
- Replaces: 23197302, 23498220
- Warranty: This genuine part is guaranteed by GM's factory warranty.
Fits the following Vehicles:
- 2015-2018 Chevrolet Corvette | Grand Sport, Stingray, Z06 | 8 Cyl 6.2 L GAS
View related parts
Chevrolet Corvette Oil Cooler Pipe Part Number: 15898973
$142.50 MSRP: $242.62
You Save: $100.12 (42%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Hose Assembly-Engine Oil Cooler Inlet & Outlet; Hose, Engine Oil Cooler
- Warranty: This genuine part is guaranteed by GM's factory warranty.
Fits the following Vehicles:
- 2005-2007 Chevrolet Corvette | Base | 8 Cyl 6.0 L GAS
View related parts
Chevrolet Corvette Outlet Hose Part Number: 23479389
$76.46 MSRP: $119.77
You Save: $43.31 (37%)
Ships in 1-3 Business Days
ADD TO CART
Product Specifications
- Other Name: Hose Assembly-Engine Oil Cooler Coolant Outlet; Oil Cooler Hose; Hose, Engine Oil Cooler
- Replaced by: 84214923
- Replaces: 22768508
- Warranty: This genuine part is guaranteed by GM's factory warranty.
Fits the following Vehicles:
- 2014-2018 Chevrolet Corvette | Grand Sport, Stingray, Z06 | 8 Cyl 6.2 L GAS
View related parts
Chevrolet Corvette Outlet Hose Part Number: 84214923
$76.46 MSRP: $119.77
You Save: $43.31 (37%)
Ships in 1-3 Business Days
ADD TO CART
Product Specifications
- Other Name: Hose Assembly-Engine Oil Cooler Coolant Outlet; Oil Cooler Hose; Hose, Engine Oil Cooler
- Warranty: This genuine part is guaranteed by GM's factory warranty.
Fits the following Vehicles:
- 2014-2019 Chevrolet Corvette | Grand Sport, Stingray, Z06, ZR1 | 8 Cyl 6.2 L GAS
View related parts
Chevrolet Corvette Outlet Hose Part Number: 85542739
$70.07 MSRP: $109.73
You Save: $39.66 (37%)
Ships in 1-3 Business Days
ADD TO CART
Product Specifications
- Other Name: Hose Assembly-Engine Oil Cooler Coolant Outlet; Hoses; Hose, Engine Oil Cooler
- Warranty: This genuine part is guaranteed by GM's factory warranty.
Fits the following Vehicles:
- 2023-2024 Chevrolet Corvette | Z06 | 8 Cyl 5.5 L GAS
View related parts
Chevrolet Corvette Outlet Hose Part Number: 84439984
$64.99 MSRP: $101.81
You Save: $36.82 (37%)
ADD TO CART
Product Specifications
- Other Name: Hose Assembly-Engine Oil Cooler Coolant Outlet; Oil Cooler Hose; Hoses; Hose, Engine Oil Cooler
- Replaced by: 85136690
- Warranty: This genuine part is guaranteed by GM's factory warranty.
Fits the following Vehicles:
- 2020-2024 Chevrolet Corvette | E-Ray, Stingray, Z06 | 8 Cyl 5.5 L GAS, 8 Cyl 6.2 L FULL HYBRID EV-GAS (FHEV), 8 Cyl 6.2 L GAS
View related parts
Chevrolet Corvette Cooler Pipe Part Number: 23212375
$110.98 MSRP: $173.81
You Save: $62.83 (37%)
ADD TO CART
Product Specifications
- Other Name: Pipe, Transmission Oil Cooler; Transmission Oil Cooler Line
- Warranty: This genuine part is guaranteed by GM's factory warranty.
Fits the following Vehicles:
- 2015-2019 Chevrolet Corvette | Grand Sport, Z06 | 8 Cyl 6.2 L GAS
View related parts
Chevrolet Corvette Line Part Number: 23488080
$139.87 MSRP: $230.41
You Save: $90.54 (40%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Pipe, Transmission Oil Cooler
- Replaces: 22768517
- Warranty: This genuine part is guaranteed by GM's factory warranty.
Fits the following Vehicles:
- 2017-2019 Chevrolet Corvette | Grand Sport, Stingray, Z06, ZR1 | 8 Cyl 6.2 L GAS
View related parts
Chevrolet Corvette Inlet Hose Part Number: 87847540
$32.82 MSRP: $51.40
You Save: $18.58 (37%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Hose-Engine Oil Cooler Coolant Outlet; Hoses; Hose, Engine Oil Cooler
- Warranty: This genuine part is guaranteed by GM's factory warranty.
Fits the following Vehicles:
- 2023-2024 Chevrolet Corvette | Z06 | 8 Cyl 5.5 L GAS
View related parts
Chevrolet Corvette Inlet Hose Part Number: 20883812
$126.00 MSRP: $200.08
You Save: $74.08 (38%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Hose Assembly-Auxiliary Engine Oil Tank Inlet
- Replaced by: 15210122
- Warranty: This genuine part is guaranteed by GM's factory warranty.
Fits the following Vehicles:
- 2006-2013 Chevrolet Corvette | 427, 427 Limited Edition Z06, Base, Grand Sport, Z06, Z06 Carbon, ZR1 | 8 Cyl 6.2 L GAS, 8 Cyl 7.0 L GAS
View related parts
Chevrolet Corvette Cooler Pipe Part Number: 23488084
$117.88 MSRP: $187.12
You Save: $69.24 (37%)
ADD TO CART
Product Specifications
- Other Name: Pipe, Transmission Oil Cooler; Transmission Oil Cooler Line; Line
- Replaces: 23128710
- Warranty: This genuine part is guaranteed by GM's factory warranty.
Fits the following Vehicles:
- 2015-2019 Chevrolet Corvette | Grand Sport, Stingray, Z06, ZR1 | 8 Cyl 6.2 L GAS
View related parts
Chevrolet Corvette Hoses, Upper Part Number: 84378146
$126.41 MSRP: $188.95
You Save: $62.54 (34%)
Ships in 1-3 Business Days
ADD TO CART
Product Specifications
- Other Name: Hose, Radiator Inlet (Upper)
- Position: Upper
- Warranty: This genuine part is guaranteed by GM's factory warranty.
Fits the following Vehicles:
- 2019 Chevrolet Corvette | ZR1 | 8 Cyl 6.2 L GAS
View related parts
Chevrolet Corvette Hoses, Upper Part Number: 84379300
$93.27 MSRP: $138.80
You Save: $45.53 (33%)
Ships in 1-3 Business Days
ADD TO CART
Product Specifications
- Other Name: Hose, Radiator Inlet (Upper)
- Position: Upper
- Warranty: This genuine part is guaranteed by GM's factory warranty.
Fits the following Vehicles:
- 2019 Chevrolet Corvette | ZR1 | 8 Cyl 6.2 L GAS
View related parts
Chevrolet Corvette Inlet Hose, Upper Part Number: 84369152
$75.97 MSRP: $113.05
You Save: $37.08 (33%)
Ships in 1-3 Business Days
ADD TO CART
Product Specifications
- Other Name: Hose, Radiator Inlet (Upper); Transmission Oil Cooler Hose; Multi Purpose Hose.; Hoses
- Position: Upper
- Replaced by: 85147476
- Warranty: This genuine part is guaranteed by GM's factory warranty.
Fits the following Vehicles:
- 2020-2024 Chevrolet Corvette | E-Ray, Stingray | 8 Cyl 6.2 L FULL HYBRID EV-GAS (FHEV), 8 Cyl 6.2 L GAS
View related parts
Chevrolet Corvette Inlet Hose, Upper Part Number: 84660335
$86.55 MSRP: $128.80
You Save: $42.25 (33%)
Ships in 1-3 Business Days
ADD TO CART
Product Specifications
- Other Name: Hose, Radiator Inlet (Upper); Transmission Oil Cooler Hose; Transmission Oil Cooler Line
- Position: Upper
- Warranty: This genuine part is guaranteed by GM's factory warranty.
Fits the following Vehicles:
- 2020-2024 Chevrolet Corvette | E-Ray, Stingray | 8 Cyl 6.2 L FULL HYBRID EV-GAS (FHEV), 8 Cyl 6.2 L GAS
View related parts
Chevrolet Corvette Outlet Hose Part Number: 20883811
$117.39 MSRP: $157.47
You Save: $40.08 (26%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Hose Assembly-Auxiliary Engine Oil Tank Outlet
- Replaced by: 15210117
- Warranty: This genuine part is guaranteed by GM's factory warranty.
Fits the following Vehicles:
- 2006-2013 Chevrolet Corvette | 427, 427 Limited Edition Z06, Base, Grand Sport, Z06, Z06 Carbon, ZR1 | 8 Cyl 6.2 L GAS, 8 Cyl 7.0 L GAS
View related parts
Chevrolet Corvette Hose Part Number: 12472184
Product Specifications
- Other Name: Hose, Engine Oil Cooler
- Replaces: 10226142
- Warranty: This genuine part is guaranteed by GM's factory warranty.
Fits the following Vehicles:
- 1990-1993 Chevrolet Corvette | ZR-1 | 8 Cyl 5.7 L GAS
View related parts
Chevrolet Corvette Oil Cooler Pipe Part Number: 25860736
Product Specifications
- Other Name: Hose Assembly-Engine Oil Cooler Inlet & Outlet; Hose, Engine Oil Cooler
- Warranty: This genuine part is guaranteed by GM's factory warranty.
Fits the following Vehicles:
- 2008-2009 Chevrolet Corvette | Base | 8 Cyl 6.2 L GAS
View related parts
Chevrolet Corvette Hose Part Number: 10219644
Product Specifications
- Other Name: Hose, Engine Oil Cooler
- Warranty: This genuine part is guaranteed by GM's factory warranty.
Fits the following Vehicles:
- 1994-1995 Chevrolet Corvette | ZR-1 | 8 Cyl 5.7 L GAS

| Page 1 of 2 |Next >

1-20 of 29 Results

Chevrolet Corvette Oil Cooler Hose

Want to cut long-term maintenance and repair costs? Choose OEM Oil Cooler Hose. Those parts deliver top durability you can trust. On our site, you'll find a huge catalog of genuine Chevrolet Corvette parts. Prices are unbeatable, so you can keep more in your pocket. Every OEM Chevrolet Corvette Oil Cooler Hose includes a manufacturer's warranty. You can also get an easy return policy that keeps buying risk free. Fast delivery, get your car on the road quickly. It's simple to search, compare, and order. Stop guessing about quality or fit. Order today and save with parts that last.

Chevrolet Corvette Oil Cooler Hose Parts and Q&A

Upper Hose
15870518
Q: How to replace the Engine Oil Cooler Hose/Pipe on Chevrolet Corvette?
A:
Firstly, before starting the process of replacing, install an oil drain pan below the vehicle. Remove the engine Oil Cooler Hose/pipe f rom the Radiator, then remove the engine Oil Cooler Hose/pipe cl ip from the Fan Shroud. Finally remove the bolt that fastens the engine Oil Cooler Hose/pipe assembly to the engine block removal follows the bolt fastening the engine Oil Cooler Hose/pipe to the oil filter housing. Then remove the engine Oil Cooler Hose/pipe assembly from the vehicle discarding all engine Oil Cooler Hose/pipe seals. For installation, first install new engine Oil Cooler Hose/pipe seals and install the engine Oil Cooler Hose/pipe assembly back in vehicle. Secure the engine Oil Cooler Hose/pipe to the oil filter housing bolts installing and tighten, 12 nm (106 lb.in) and install the bolt and tighten, 25 nm (18 lb ft) fasten to the engine block. Reject the oil drain pan from the bottom part of the car, make sure that the quick connector fitting is pulled to some distance and pulled back to assure correlation connection. Lastly, fit the engine Oil Cooler Hose/pipes onto the Radiator and mount the engine Oil Cooler Hose/pipe clip onto the Fan Shroud and before refilling the engine oil.
Oil Cooler Pipe
15898973
Q: How to Change the Oil Cooler Hose Without Using KPS on a Chevrolet Corvette?
A:
The replacement process of the engine Oil Cooler Hose/pipe begins by installing a pan for draining oil underneath the car. The left Catalytic Converter and left fender liner must be removed for the operation. Before proceeding disconnect the engine Oil Cooler Hose/pipe from its position on the external oil cooler and remove its clip from the Fan Shroud. You need to take out the bolt connecting the engine Oil Cooler Hose/pipe assembly to the engine block then remove the bolts connecting it to the oil filter housing. Extraction of these components allows removal of the engine Oil Cooler Hose/pipe assembly where all seals must be discarded. Installation begins with new engine Oil Cooler Hose/pipe seals before you attach the engine Oil Cooler Hose/pipe assembly to the vehicle. Begin by securing the hose/pipe to the oil filter housing with bolts while tightening them to 12 n.m (106 lb in). Proceed to tighten the engine block bolt to 25 n.m (18 lb ft). Check that the quick connect fitting maintains its secure position after placement by pushing it directly onto its spot and pulling it to engage safely. Mount the engine Oil Cooler Hose/pipes to the external oil cooler before reattaching the engine Oil Cooler Hose/pipe clip to the Fan Shroud. In the last step you should replace the left fender liner and left Catalytic Converter before adding new oil to the engine and testing for leaks.