How to replace the Engine Oil Cooler Hose/Pipe on 2006 Chevrolet Corvette?

To replace the engine Oil Cooler Hose/pipe, you start by installing an oil drain pan under the bottom of the car. Undo the engine Oil Cooler Hose/pipe from the Radiator, also remove the engine Oil Cooler Hose/pipe clip off from the Fan Shroud. Next, get rid of the bolt that keeps the engine Oil Cooler Hose/pipe assembly onto the engine block and then the bolts that keep the engine Oil Cooler Hose/pipe onto the oil filter housing. After they are removed, remove the engine Oil Cooler Hose/pipe assembly and get rid of all the seals. For installation, one has to place a new engine Oil Cooler Hose/pipe seals then install the engine Oil Cooler Hose/pipe assembly back into the vehicles. Install the bolts to fix the hose/pipe to the oil filter housing and tightening it to 12 nm (106 inch lbs) and t he bolt to fix the assembly to the engine block tightening it torques to 25 nm (18 ft. Lbs.). Afterward, dispense with the oil drain pan and check that the quick fit fitting is slipped on and then withdrawn to verify appropriate connector detention before repositioning the engine Oil Cooler Hose/pipes to the engine Radiator. Finally, tighten the engine Oil Cooler Hose/pipe clip to the Fan Shroud and fill in the engine oil.

OEM 2006 Chevrolet Corvette Oil Cooler Hose

Oil Cooler Line

Select Vehicle by Model
Select Vehicle by VIN

Select Vehicle by Model

Make

Model

Year

Select Vehicle by VIN

For the most accurate results, select vehicle by your VIN (Vehicle Identification Number).

4 Oil Cooler Hoses found

View related parts
2006 Chevrolet Corvette Oil Cooler Pipe
Part Number: 15848590
$179.40 MSRP: $282.25
You Save: $102.85 (37%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Hose Assembly-Engine Oil Cooler Inlet & Outlet; Hose, Engine Oil Cooler
- Replaces: 20842845
- Item Weight: 2.30 Pounds
- Item Dimensions: 8.2 x 44.7 x 12.4 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 15848590
- Warranty: This genuine part is guaranteed by GM's factory warranty.
More Info
Fits the following 2006 Chevrolet Corvette Submodels:
- 427, 427 Limited Edition Z06, Base, Grand Sport, Z06, Z06 Carbon | 8 Cyl 6.2 L GAS, 8 Cyl 7.0 L GAS
View related parts
2006 Chevrolet Corvette Oil Cooler Pipe
Part Number: 15898973
$144.09 MSRP: $226.74
You Save: $82.65 (37%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Hose Assembly-Engine Oil Cooler Inlet & Outlet; Hose, Engine Oil Cooler
- Item Weight: 2.30 Pounds
- Item Dimensions: 9.1 x 37.7 x 12.2 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 15898973
- Warranty: This genuine part is guaranteed by GM's factory warranty.
More Info
Fits the following 2006 Chevrolet Corvette Submodels:
- Base | 8 Cyl 6.0 L GAS
View related parts
2006 Chevrolet Corvette Outlet Hose
Part Number: 20883811
$117.39 MSRP: $157.47
You Save: $40.08 (26%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Hose Assembly-Auxiliary Engine Oil Tank Outlet
- Replaced by: 15210117
- Item Weight: 1.30 Pounds
- Item Dimensions: 27.5 x 2.0 x 2.1 inches
- Condition: New
- SKU: 20883811
- Warranty: This genuine part is guaranteed by GM's factory warranty.
More Info
Fits the following 2006 Chevrolet Corvette Submodels:
- 427, 427 Limited Edition Z06, Base, Grand Sport, Z06, Z06 Carbon, ZR1 | 8 Cyl 6.2 L GAS, 8 Cyl 7.0 L GAS
View related parts
2006 Chevrolet Corvette Inlet Hose
Part Number: 20883812
$126.00 MSRP: $200.08
You Save: $74.08 (38%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Hose Assembly-Auxiliary Engine Oil Tank Inlet
- Replaced by: 15210122
- Item Weight: 1.30 Pounds
- Item Dimensions: 4.1 x 28.6 x 2.0 inches
- Condition: New
- SKU: 20883812
- Warranty: This genuine part is guaranteed by GM's factory warranty.
More Info
Fits the following 2006 Chevrolet Corvette Submodels:
- 427, 427 Limited Edition Z06, Base, Grand Sport, Z06, Z06 Carbon, ZR1 | 8 Cyl 6.2 L GAS, 8 Cyl 7.0 L GAS

2006 Chevrolet Corvette Oil Cooler Hose

With a comprehensive array of OEM 2006 Chevrolet Corvette Oil Cooler Hose, from fuel pumps to door handles, our website is a one-stop-shop for your needs. All our genuine 2006 Chevrolet Corvette Oil Cooler Hose are backed by the manufacturer's warranty and are offered at competitive prices in the market. Rest assured, you can shop with complete confidence.

2006 Chevrolet Corvette Oil Cooler Hose Parts Questions & Experts Answers

Q: How to replace the Engine Oil Cooler Hose/Pipe on 2006 Chevrolet Corvette?
A: To replace the engine Oil Cooler Hose/pipe, you start by installing an oil drain pan under the bottom of the car. Undo the engine Oil Cooler Hose/pipe from the Radiator, also remove the engine Oil Cooler Hose/pipe clip off from the Fan Shroud. Next, get rid of the bolt that keeps the engine Oil Cooler Hose/pipe assembly onto the engine block and then the bolts that keep the engine Oil Cooler Hose/pipe onto the oil filter housing. After they are removed, remove the engine Oil Cooler Hose/pipe assembly and get rid of all the seals. For installation, one has to place a new engine Oil Cooler Hose/pipe seals then install the engine Oil Cooler Hose/pipe assembly back into the vehicles. Install the bolts to fix the hose/pipe to the oil filter housing and tightening it to 12 nm (106 inch lbs) and t he bolt to fix the assembly to the engine block tightening it torques to 25 nm (18 ft. Lbs.). Afterward, dispense with the oil drain pan and check that the quick fit fitting is slipped on and then withdrawn to verify appropriate connector detention before repositioning the engine Oil Cooler Hose/pipes to the engine Radiator. Finally, tighten the engine Oil Cooler Hose/pipe clip to the Fan Shroud and fill in the engine oil.