OEM 2005 Chevrolet Corvette Oil Cooler Hose

2005 Chevrolet Corvette Oil Cooler Hose Parts Questions & Experts Answers

• Q: How to replace the Engine Oil Cooler Hose/Pipe on 2005 Chevrolet Corvette?

  A: To replace the engine Oil Cooler Hose/pipe, one should start by placing an oil drain pan under the vehicle. Untie the engine Oil Cooler Hose/pipe from the Radiator and then remove the engine Oil Cooler Hose/pipe clip from the Fan Shroud. Then, unhook the bolt that fixes the engine Oil Cooler Hose/pipe assembly to the engine block, and remove bolt fixing the engine Oil Cooler Hose/pipe to the oil filter housing. Following that, remove the engine Oil Cooler Hose/pipe assembly from the vehicle and dispose of all engine Oil Cooler Hose/pipe seals. In installation, begin by putting new engine Oil Cooler Hose/pipe seals, after which install the engine Oil Cooler Hose/pipe assembly back onto the vehicle. Mount bolt s to attach engine Oil Cooler Hose/pipe to the oil filter housing and tighten to 12 nm (106 inch lbs.), then install bolt to attach the assembly to the engine block tightening to 25 nm (18 ft. Lbs.). Take off the oil drain pan under the vehicle, making sure that the quick connect fitting is pulled off and then pushed back to confirm the fitting engagement before connecting the engine Oil Cooler Hose/pipes to the Radiator. Lastly, install the engine Oil Cooler Hose/pipe clip to the Fan Shroud and add more engine oil.