How to replace the radiator hose outlet on 2005 Chevrolet Corvette?

The vehicle requires lifting then support before starting the Radiator outlet hose replacement process. The hose clamp pliers (J38185) enables the removal of Radiator outlet hose clamp tension. This allows disconnecting the hose from both Radiator and Radiator during cooling system draining. Lower the vehicle afterwards by following this series of steps using hose clamp pliers (J38185) to release tension on engine clamps then disconnecting the Radiator outlet hose from engine fittings and removing it. Alignment of reference marks between hoses and Radiator must occur before installation because this alignment helps avoid Radiator fitting failure from strain that can damage the part. Apply clean coolant to the inside walls of the new hose before you can install the Radiator outlet hose by hooking it up between engine and applying clamp tension at engine. Upraise the vehicle to hook the hose to the Radiator before tightening a clamp from the Radiator side. Complete the process by bringing down the vehicle and performing an appropriate cooling system fill-up.

OEM 2005 Chevrolet Corvette Radiator Hose

Radiator Hose Tube

Select Vehicle by Model
Select Vehicle by VIN

Select Vehicle by Model

Make

Model

Year

Select Vehicle by VIN

For the most accurate results, select vehicle by your VIN (Vehicle Identification Number).

3 Radiator Hoses found

View related parts
2005 Chevrolet Corvette Upper Hose Part Number: 10359364
$54.41 MSRP: $80.96
You Save: $26.55 (33%)
Ships in 1-3 Business Days
ADD TO CART
Product Specifications
- Other Name: Hose-Radiator Inlet; Multi Purpose Hose; Radiator Hose; Cooling Hose; Hose, Radiator Inlet (Upper)
- Position: Upper
- Item Weight: 1.20 Pounds
- Item Dimensions: 4.3 x 3.1 x 18.7 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 10359364
- Warranty: This genuine part is guaranteed by GM's factory warranty.
More Info
Fits the following 2005 Chevrolet Corvette Submodels:
- 427 Limited Edition Z06, Base, Z06 | 8 Cyl 6.0 L GAS, 8 Cyl 6.2 L GAS, 8 Cyl 7.0 L GAS
View related parts
2005 Chevrolet Corvette Lower Hose Part Number: 10359363
$37.65 MSRP: $56.03
You Save: $18.38 (33%)
Ships in 1-3 Business Days
ADD TO CART
Product Specifications
- Other Name: Hose, Radiator Outlet (Lower); Multi Purpose Hose; Radiator Hose; Cooling Hose
- Position: Lower
- Item Weight: 0.90 Pounds
- Item Dimensions: 4.1 x 3.7 x 13.7 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 10359363
- Warranty: This genuine part is guaranteed by GM's factory warranty.
More Info
Fits the following 2005 Chevrolet Corvette Submodels:
- 427 Limited Edition Z06, Base, Z06 | 8 Cyl 6.0 L GAS, 8 Cyl 6.2 L GAS, 8 Cyl 7.0 L GAS
View related parts
2005 Chevrolet Corvette Outlet Hose Part Number: 22812512
Product Specifications
- Other Name: Hose Assembly-Radiator Surge Tank Outlet; Radiator Hose
- Replaces: 10305353
- Item Weight: 2.10 Pounds
- Item Dimensions: 35.0 x 12.1 x 4.1 inches
- Condition: New
- SKU: 22812512
- Warranty: This genuine part is guaranteed by GM's factory warranty.
More Info
Fits the following 2005 Chevrolet Corvette Submodels:
- 427, 427 Limited Edition Z06, Base, Grand Sport, Z06, Z06 Carbon | 8 Cyl 6.0 L GAS, 8 Cyl 6.2 L GAS, 8 Cyl 7.0 L GAS

2005 Chevrolet Corvette Radiator Hose

With a comprehensive array of OEM 2005 Chevrolet Corvette Radiator Hose, from fuel pumps to door handles, our website is a one-stop-shop for your needs. All our genuine 2005 Chevrolet Corvette Radiator Hose are backed by the manufacturer's warranty and are offered at competitive prices in the market. Rest assured, you can shop with complete confidence.

2005 Chevrolet Corvette Radiator Hose Parts and Q&A

Q: How to replace the radiator hose outlet on 2005 Chevrolet Corvette?
A: The vehicle requires lifting then support before starting the Radiator outlet hose replacement process. The hose clamp pliers (J38185) enables the removal of Radiator outlet hose clamp tension. This allows disconnecting the hose from both Radiator and Radiator during cooling system draining. Lower the vehicle afterwards by following this series of steps using hose clamp pliers (J38185) to release tension on engine clamps then disconnecting the Radiator outlet hose from engine fittings and removing it. Alignment of reference marks between hoses and Radiator must occur before installation because this alignment helps avoid Radiator fitting failure from strain that can damage the part. Apply clean coolant to the inside walls of the new hose before you can install the Radiator outlet hose by hooking it up between engine and applying clamp tension at engine. Upraise the vehicle to hook the hose to the Radiator before tightening a clamp from the Radiator side. Complete the process by bringing down the vehicle and performing an appropriate cooling system fill-up.