How to replace the Engine Oil Cooler Hose/Pipe on 2007 Chevrolet Corvette?

To of the replace the engine Oil Cooler Hose/pipe, one would start by placing an oil drain pan under the vehicle. Disconnect the engine Oil Cooler Hose/pipe from the Radiator, and remove the engine Oil Cooler Hose/pipe clip from the Fan Shroud. Next, if there are, remove the bolt that secures the engine Oil Cooler Hose/pipe assembly to the engine block, and the bolts that secure the engine Oil Cooler Hose/pipe to the oil filter housing. After that, remove the engine Oil Cooler Hose/pipe assembly and dispose off all seals. For installation, first fit new engine Oil Cooler Hose/pipe seals then refit the engine Oil Cooler Hose/pipe assembly back to the vehicle. Put in the bolts to secure the hose/pipe to the oil filter housing, tighten it up to 12 n.m (106 lb in) then put in the bolt to secure the assembly to the engine block and tighten to 25 n.m (18 lb ft). After that, take away the oil drain pan, and you make sure that the quick connect fitting is properly engaged by pulling it back after pushing it on. Finally, connect the engine Oil Cooler Hose/pipes to the Radiator, install the engine Oil Cooler Hose/ pipe clip on to the Fan Shroud and fill up your engine oil.

OEM 2007 Chevrolet Corvette Oil Cooler Hose

Oil Cooler Line

Select Vehicle by Model
Select Vehicle by VIN

Select Vehicle by Model

Make

Model

Year

Select Vehicle by VIN

For the most accurate results, select vehicle by your VIN (Vehicle Identification Number).

4 Oil Cooler Hoses found

View related parts
2007 Chevrolet Corvette Oil Cooler Pipe
Part Number: 15848590
$179.40 MSRP: $282.25
You Save: $102.85 (37%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Hose Assembly-Engine Oil Cooler Inlet & Outlet; Hose, Engine Oil Cooler
- Replaces: 20842845
- Item Weight: 2.30 Pounds
- Item Dimensions: 8.2 x 44.7 x 12.4 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 15848590
- Warranty: This genuine part is guaranteed by GM's factory warranty.
More Info
Fits the following 2007 Chevrolet Corvette Submodels:
- 427, 427 Limited Edition Z06, Base, Grand Sport, Z06, Z06 Carbon | 8 Cyl 6.2 L GAS, 8 Cyl 7.0 L GAS
View related parts
2007 Chevrolet Corvette Oil Cooler Pipe
Part Number: 15898973
$144.09 MSRP: $226.74
You Save: $82.65 (37%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Hose Assembly-Engine Oil Cooler Inlet & Outlet; Hose, Engine Oil Cooler
- Item Weight: 2.30 Pounds
- Item Dimensions: 9.1 x 37.7 x 12.2 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 15898973
- Warranty: This genuine part is guaranteed by GM's factory warranty.
More Info
Fits the following 2007 Chevrolet Corvette Submodels:
- Base | 8 Cyl 6.0 L GAS
View related parts
2007 Chevrolet Corvette Outlet Hose
Part Number: 20883811
$117.39 MSRP: $157.47
You Save: $40.08 (26%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Hose Assembly-Auxiliary Engine Oil Tank Outlet
- Replaced by: 15210117
- Item Weight: 1.30 Pounds
- Item Dimensions: 27.5 x 2.0 x 2.1 inches
- Condition: New
- SKU: 20883811
- Warranty: This genuine part is guaranteed by GM's factory warranty.
More Info
Fits the following 2007 Chevrolet Corvette Submodels:
- 427, 427 Limited Edition Z06, Base, Grand Sport, Z06, Z06 Carbon, ZR1 | 8 Cyl 6.2 L GAS, 8 Cyl 7.0 L GAS
View related parts
2007 Chevrolet Corvette Inlet Hose
Part Number: 20883812
$126.00 MSRP: $200.08
You Save: $74.08 (38%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Hose Assembly-Auxiliary Engine Oil Tank Inlet
- Replaced by: 15210122
- Item Weight: 1.30 Pounds
- Item Dimensions: 4.1 x 28.6 x 2.0 inches
- Condition: New
- SKU: 20883812
- Warranty: This genuine part is guaranteed by GM's factory warranty.
More Info
Fits the following 2007 Chevrolet Corvette Submodels:
- 427, 427 Limited Edition Z06, Base, Grand Sport, Z06, Z06 Carbon, ZR1 | 8 Cyl 6.2 L GAS, 8 Cyl 7.0 L GAS

2007 Chevrolet Corvette Oil Cooler Hose

With a comprehensive array of OEM 2007 Chevrolet Corvette Oil Cooler Hose, from fuel pumps to door handles, our website is a one-stop-shop for your needs. All our genuine 2007 Chevrolet Corvette Oil Cooler Hose are backed by the manufacturer's warranty and are offered at competitive prices in the market. Rest assured, you can shop with complete confidence.

2007 Chevrolet Corvette Oil Cooler Hose Parts Questions & Experts Answers

Q: How to replace the Engine Oil Cooler Hose/Pipe on 2007 Chevrolet Corvette?
A: To of the replace the engine Oil Cooler Hose/pipe, one would start by placing an oil drain pan under the vehicle. Disconnect the engine Oil Cooler Hose/pipe from the Radiator, and remove the engine Oil Cooler Hose/pipe clip from the Fan Shroud. Next, if there are, remove the bolt that secures the engine Oil Cooler Hose/pipe assembly to the engine block, and the bolts that secure the engine Oil Cooler Hose/pipe to the oil filter housing. After that, remove the engine Oil Cooler Hose/pipe assembly and dispose off all seals. For installation, first fit new engine Oil Cooler Hose/pipe seals then refit the engine Oil Cooler Hose/pipe assembly back to the vehicle. Put in the bolts to secure the hose/pipe to the oil filter housing, tighten it up to 12 n.m (106 lb in) then put in the bolt to secure the assembly to the engine block and tighten to 25 n.m (18 lb ft). After that, take away the oil drain pan, and you make sure that the quick connect fitting is properly engaged by pulling it back after pushing it on. Finally, connect the engine Oil Cooler Hose/pipes to the Radiator, install the engine Oil Cooler Hose/ pipe clip on to the Fan Shroud and fill up your engine oil.