How to replace the Rear Ride Height Sensor (Without ZR1) on 2010 Chevrolet Corvette?

The first step to replace the Electronic Suspension Rear Position Sensor (Without ZR1) requires a driver to turn off the ignition switch while elevating and supporting the vehicle. The tire assembly and wheel should come off first before disconnecting the electronic suspension control (ESC) position sensor harness connector along with the position sensor link from the control arm link stud. The first step is to remove both the position sensor mounting bolt and then extract the position sensor from the vehicle. The new position sensor requires installation onto the vehicle but always follow recommended fastener caution procedures. Put the position sensor mounting bolt in and torque it to 7 Nm (62 lb in), after that connect the position sensor link to the control arm link stud and connect the ESC position harness connector. Reposition the tire together with its wheel then safely lower the vehicle.

OEM 2010 Chevrolet Corvette Ride Height Sensor

Suspension Level Hight Sensor

Select Vehicle by Model
Select Vehicle by VIN

Select Vehicle by Model

Make

Model

Year

Select Vehicle by VIN

For the most accurate results, select vehicle by your VIN (Vehicle Identification Number).

5 Ride Height Sensors found

View related parts
2010 Chevrolet Corvette Position Sensor Part Number: 89047645
$299.13 MSRP: $536.56
You Save: $237.43 (45%)
Product Specifications
- Other Name: Sensor Assembly, Electronic Suspension Rear Position (W/Accelerometer); Ride Height Sensor; Rear Sensor; Sensor, Air Suspension Leveling Or Level Control
- Position: Rear
- Item Weight: 1.60 Pounds
- Item Dimensions: 6.1 x 4.1 x 3.2 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 89047645
- Warranty: This genuine part is guaranteed by GM's factory warranty.
More Info
Fits the following 2010 Chevrolet Corvette Submodels:
- 427, 427 Limited Edition Z06, Base, Grand Sport, Z06, Z06 Carbon, ZR1 | 8 Cyl 6.0 L GAS, 8 Cyl 6.2 L GAS, 8 Cyl 7.0 L GAS
View related parts
2010 Chevrolet Corvette Position Sensor Part Number: 89047644
Product Specifications
- Other Name: Sensor Assembly, Electronic Suspension Rear Position (W/Accelerometer); Ride Height Sensor; Rear Sensor; Sensor, Air Suspension Leveling Or Level Control
- Position: Rear
- Item Weight: 1.60 Pounds
- Item Dimensions: 6.2 x 4.2 x 3.3 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 89047644
- Warranty: This genuine part is guaranteed by GM's factory warranty.
More Info
Fits the following 2010 Chevrolet Corvette Submodels:
- 427, 427 Limited Edition Z06, Base, Grand Sport, Z06, Z06 Carbon, ZR1 | 8 Cyl 6.0 L GAS, 8 Cyl 6.2 L GAS, 8 Cyl 7.0 L GAS
View related parts
2010 Chevrolet Corvette Position Sensor Part Number: 89047642
Product Specifications
- Other Name: Sensor, Air Suspension Leveling Or Level Control; Suspension Ride Height Sensor; Ride Height Sensor; Front Sensor
- Position: Front
- Item Weight: 0.70 Pounds
- Item Dimensions: 4.6 x 2.9 x 2.9 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 89047642
- Warranty: This genuine part is guaranteed by GM's factory warranty.
More Info
Fits the following 2010 Chevrolet Corvette Submodels:
- 427, 427 Limited Edition Z06, Base, Grand Sport, Z06, Z06 Carbon, ZR1 | 8 Cyl 6.0 L GAS, 8 Cyl 6.2 L GAS, 8 Cyl 7.0 L GAS
View related parts
2010 Chevrolet Corvette Position Sensor, Rear Driver Side Part Number: 22742386
Product Specifications
- Other Name: Sensor Assembly-Electronic Suspension Rear Position; Ride Height Sensor; Sensor, Air Suspension Leveling Or Level Control
- Position: Rear Driver Side
- Replaces: 25962016
- Item Weight: 1.10 Pounds
- Item Dimensions: 8.1 x 5.9 x 5.7 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 22742386
- Warranty: This genuine part is guaranteed by GM's factory warranty.
More Info
Fits the following 2010 Chevrolet Corvette Submodels:
- 427, Z06, Z06 Carbon, ZR1 | 8 Cyl 6.2 L GAS, 8 Cyl 7.0 L GAS
View related parts
2010 Chevrolet Corvette Position Sensor Part Number: 89047643
$222.90 MSRP: $399.82
You Save: $176.92 (45%)
Product Specifications
- Other Name: Sensor, Air Suspension Leveling Or Level Control; Suspension Ride Height Sensor; Ride Height Sensor; Front Sensor
- Position: Front
- Item Weight: 0.70 Pounds
- Item Dimensions: 4.6 x 2.9 x 2.8 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 89047643
- Warranty: This genuine part is guaranteed by GM's factory warranty.
More Info
Fits the following 2010 Chevrolet Corvette Submodels:
- 427, 427 Limited Edition Z06, Base, Grand Sport, Z06, Z06 Carbon, ZR1 | 8 Cyl 6.0 L GAS, 8 Cyl 6.2 L GAS, 8 Cyl 7.0 L GAS

2010 Chevrolet Corvette Ride Height Sensor

With a comprehensive array of OEM 2010 Chevrolet Corvette Ride Height Sensor, from fuel pumps to door handles, our website is a one-stop-shop for your needs. All our genuine 2010 Chevrolet Corvette Ride Height Sensor are backed by the manufacturer's warranty and are offered at competitive prices in the market. Rest assured, you can shop with complete confidence.

2010 Chevrolet Corvette Ride Height Sensor Parts and Q&A

Q: How to replace the Rear Ride Height Sensor (Without ZR1) on 2010 Chevrolet Corvette?
A: The first step to replace the Electronic Suspension Rear Position Sensor (Without ZR1) requires a driver to turn off the ignition switch while elevating and supporting the vehicle. The tire assembly and wheel should come off first before disconnecting the electronic suspension control (ESC) position sensor harness connector along with the position sensor link from the control arm link stud. The first step is to remove both the position sensor mounting bolt and then extract the position sensor from the vehicle. The new position sensor requires installation onto the vehicle but always follow recommended fastener caution procedures. Put the position sensor mounting bolt in and torque it to 7 Nm (62 lb in), after that connect the position sensor link to the control arm link stud and connect the ESC position harness connector. Reposition the tire together with its wheel then safely lower the vehicle.