How to replace the brake drum on 2010 Chevrolet HHR?

Raise the vehicle with safe equipment so you can begin replacing the Brake Drum. Take off the tire and wheel from the vehicle. Remove retained brake components as they may be unnecessary for replacement. Then, remove the Brake Drum. After reusing the Brake Drum apply j-41013 tool to remove corrosion from wheel hub flange. After cleaning away wheel hub corrosion using the j-42450-a kit you can put the Brake Drum in place. Perform drum brake alignment then put back on the tire wheel unit. Press the brake button two or three times to let the brake shoes find their position on the Brake Drum.

OEM 2010 Chevrolet HHR Brake Drum

Select Vehicle by Model
Select Vehicle by VIN

Select Vehicle by Model

Make

Model

Year

Select Vehicle by VIN

For the most accurate results, select vehicle by your VIN (Vehicle Identification Number).

1 Brake Drum found

View related parts
2010 Chevrolet HHR Drum
Part Number: 25806004
Product Specifications
- Other Name: Drum, Front And Rear Wheel Brake; Brake Drum
- Position: Rear
- Item Weight: 12.50 Pounds
- Item Dimensions: 4.2 x 13.5 x 12.1 inches
- Condition: New
- Fitment Type: Direct Replacement
- Require Quantity: 2
- SKU: 25806004
- Warranty: This genuine part is guaranteed by GM's factory warranty.
More Info
Fits the following 2010 Chevrolet HHR Submodels:
- LS, LS Panel, LT, LT Panel, SS, SS Panel | 4 Cyl 2.0 L GAS, 4 Cyl 2.2 L FLEX, 4 Cyl 2.4 L FLEX

2010 Chevrolet HHR Brake Drum

With a comprehensive array of OEM 2010 Chevrolet HHR Brake Drum, from fuel pumps to door handles, our website is a one-stop-shop for your needs. All our genuine 2010 Chevrolet HHR Brake Drum are backed by the manufacturer's warranty and are offered at competitive prices in the market. Rest assured, you can shop with complete confidence.

2010 Chevrolet HHR Parts Questions & Experts Answers

Q: How to replace the brake drum on 2010 Chevrolet HHR?
A: Raise the vehicle with safe equipment so you can begin replacing the Brake Drum. Take off the tire and wheel from the vehicle. Remove retained brake components as they may be unnecessary for replacement. Then, remove the Brake Drum. After reusing the Brake Drum apply j-41013 tool to remove corrosion from wheel hub flange. After cleaning away wheel hub corrosion using the j-42450-a kit you can put the Brake Drum in place. Perform drum brake alignment then put back on the tire wheel unit. Press the brake button two or three times to let the brake shoes find their position on the Brake Drum.