How to Replace Coil Springs on 2010 Chevrolet HHR?

Vehicle feet off the ground after first placing support under its height point for clutch replacement. The rear axle needs to be supported using tall jack stands so they sit near each Shock Absorber. The u-clips securing the rear brake hoses at the rear axle can be removed first before loosening the lower Shock Absorber bolts. Use the tall jack stands to carefully lower the rear axle toward the floor which relaxes the rear springs for spring removal. Detach the upper spring seat/jounce bumper from the spring but maintain the lower spring seat on the axle base. When placing rear springs make sure to position them with the colored tag pointing toward the vehicle's rear. The springs require no specific orientation during installation. Position the spring with the tag toward the rear while ensuring the lower coil fits into the lower spring seat. Next, install the upper spring seat/jounce bumper on the spring. To install the lower Shock Absorber bolts you need to use jack stands to lift the rear axle then compress the rear springs. After securing the u-clips replace the rear brake hoses back in the axle brackets.

OEM 2010 Chevrolet HHR Coil Springs

Strut Spring

Select Vehicle by Model
Select Vehicle by VIN

Select Vehicle by Model

Make

Model

Year

Select Vehicle by VIN

For the most accurate results, select vehicle by your VIN (Vehicle Identification Number).

7 Coil Springs found

View related parts
2010 Chevrolet HHR Coil Spring, Rear
Part Number: 22712222
$68.02 MSRP: $121.47
You Save: $53.45 (44%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Spring, Rear Spring; Coil Springs; Spring
- Position: Rear
- Item Weight: 6.20 Pounds
- Item Dimensions: 13.3 x 6.0 x 6.2 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 22712222
- Warranty: This genuine part is guaranteed by GM's factory warranty.
More Info
Fits the following 2010 Chevrolet HHR Submodels:
- LS, LS Panel, LT, LT Panel, SS, SS Panel | 4 Cyl 2.0 L GAS, 4 Cyl 2.2 L FLEX, 4 Cyl 2.2 L GAS, 4 Cyl 2.4 L FLEX, 4 Cyl 2.4 L GAS
View related parts
2010 Chevrolet HHR Spring, Front
Part Number: 25798126
Product Specifications
- Other Name: Spring, Front Chassis; Coil Spring Set; Coil Springs
- Position: Front
- Item Weight: 5.30 Pounds
- Item Dimensions: 8.0 x 6.2 x 6.1 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 25798126
- Warranty: This genuine part is guaranteed by GM's factory warranty.
More Info
Fits the following 2010 Chevrolet HHR Submodels:
- LS, LS Panel, LT, LT Panel, SS, SS Panel | 4 Cyl 2.0 L GAS, 4 Cyl 2.2 L FLEX, 4 Cyl 2.2 L GAS, 4 Cyl 2.4 L FLEX, 4 Cyl 2.4 L GAS
View related parts
2010 Chevrolet HHR Coil Spring, Driver Side
Part Number: 22712125
Product Specifications
- Other Name: Spring-Front; Coil Springs; Spring
- Position: Driver Side
- Item Weight: 5.00 Pounds
- Item Dimensions: 15.3 x 6.2 x 6.1 inches
- Condition: New
- SKU: 22712125
- Warranty: This genuine part is guaranteed by GM's factory warranty.
More Info
Fits the following 2010 Chevrolet HHR Submodels:
- LS, LS Panel, LT, LT Panel, SS, SS Panel | 4 Cyl 2.0 L GAS, 4 Cyl 2.2 L FLEX, 4 Cyl 2.2 L GAS, 4 Cyl 2.4 L FLEX, 4 Cyl 2.4 L GAS
View related parts
2010 Chevrolet HHR Coil Spring, Rear
Part Number: 15938616
Product Specifications
- Other Name: Spring, Rear Spring; Coil Spring Set; Coil Springs; Spring
- Position: Rear
- Item Weight: 4.90 Pounds
- Item Dimensions: 7.8 x 6.4 x 6.2 inches
- Condition: New
- Fitment Type: Direct Replacement
- Require Quantity: 2
- SKU: 15938616
- Warranty: This genuine part is guaranteed by GM's factory warranty.
More Info
Fits the following 2010 Chevrolet HHR Submodels:
- SS, SS Panel | 4 Cyl 2.0 L GAS
View related parts
2010 Chevrolet HHR Spring, Front
Part Number: 22735636
Product Specifications
- Other Name: Spring, Front Chassis; Coil Springs
- Position: Front
- Item Weight: 3.20 Pounds
- Item Dimensions: 7.5 x 5.9 x 5.8 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 22735636
- Warranty: This genuine part is guaranteed by GM's factory warranty.
More Info
Fits the following 2010 Chevrolet HHR Submodels:
- LS, LS Panel, LT, LT Panel, SS, SS Panel | 4 Cyl 2.0 L GAS, 4 Cyl 2.2 L FLEX, 4 Cyl 2.2 L GAS, 4 Cyl 2.4 L FLEX, 4 Cyl 2.4 L GAS
View related parts
2010 Chevrolet HHR Coil Spring, Front
Part Number: 22735635
Product Specifications
- Other Name: Spring, Front Chassis; Coil Springs; Spring
- Position: Front
- Item Weight: 5.20 Pounds
- Item Dimensions: 14.3 x 6.2 x 6.1 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 22735635
- Warranty: This genuine part is guaranteed by GM's factory warranty.
More Info
Fits the following 2010 Chevrolet HHR Submodels:
- LS, LS Panel, LT, LT Panel, SS, SS Panel | 4 Cyl 2.0 L GAS, 4 Cyl 2.2 L FLEX, 4 Cyl 2.2 L GAS, 4 Cyl 2.4 L FLEX, 4 Cyl 2.4 L GAS
View related parts
2010 Chevrolet HHR Spring, Front
Part Number: 25904874
Product Specifications
- Other Name: Spring, Front Chassis; Coil Springs
- Position: Front
- Condition: New
- Fitment Type: Direct Replacement
- Require Quantity: 2
- SKU: 25904874
- Warranty: This genuine part is guaranteed by GM's factory warranty.
More Info
Fits the following 2010 Chevrolet HHR Submodels:
- LS, LS Panel, LT, LT Panel, SS, SS Panel | 4 Cyl 2.0 L GAS, 4 Cyl 2.2 L FLEX, 4 Cyl 2.2 L GAS, 4 Cyl 2.4 L FLEX, 4 Cyl 2.4 L GAS

2010 Chevrolet HHR Coil Springs

With a comprehensive array of OEM 2010 Chevrolet HHR Coil Springs, from fuel pumps to door handles, our website is a one-stop-shop for your needs. All our genuine 2010 Chevrolet HHR Coil Springs are backed by the manufacturer's warranty and are offered at competitive prices in the market. Rest assured, you can shop with complete confidence.

2010 Chevrolet HHR Coil Springs Parts Questions & Experts Answers

Q: How to Replace Coil Springs on 2010 Chevrolet HHR?
A: Vehicle feet off the ground after first placing support under its height point for clutch replacement. The rear axle needs to be supported using tall jack stands so they sit near each Shock Absorber. The u-clips securing the rear brake hoses at the rear axle can be removed first before loosening the lower Shock Absorber bolts. Use the tall jack stands to carefully lower the rear axle toward the floor which relaxes the rear springs for spring removal. Detach the upper spring seat/jounce bumper from the spring but maintain the lower spring seat on the axle base. When placing rear springs make sure to position them with the colored tag pointing toward the vehicle's rear. The springs require no specific orientation during installation. Position the spring with the tag toward the rear while ensuring the lower coil fits into the lower spring seat. Next, install the upper spring seat/jounce bumper on the spring. To install the lower Shock Absorber bolts you need to use jack stands to lift the rear axle then compress the rear springs. After securing the u-clips replace the rear brake hoses back in the axle brackets.