Menu
×
Search Bar
Search by Part Number, Part Name, or Vehicle
My Garage
Cart
Help Center Contact Us

OEM 2010 Chevrolet Impala A/C Expansion Valve

Air Conditioning Expansion Valve
  • Select Vehicle by Model
  • Select Vehicle by VIN
Select Vehicle by Model
Make
Model
Year
or
Select Vehicle by VIN
For the most accurate results, select vehicle by your VIN (Vehicle Identification Number).

1 A/C Expansion Valve found

  • 2010 Chevy Impala A/C Expansion Valve - 52495729
    2010 Chevy Impala A/C Expansion Valve - 52495729
    2010 Chevy Impala A/C Expansion Valve - 52495729
    2010 Chevy Impala A/C Expansion Valve Diagram - 52495729
    View related parts

    2010 Chevrolet Impala Expansion Valve, Green Line Part Number: 52495729

    $85.31 MSRP: $175.32
    You Save: $90.01 (52%)
    Ships in 1-2 Business Days
    ADD TO CART
    Product Specifications
    • Other Name: Valve Kit, Air Conditioner Evaporator; A/C Expansion Valve; Valve Kit, A/C Expansion Refrigerant; Valve, A/C Expansion Refrigerant; Valve Kit, A/C Evaporator
    • Item Weight: 1.00 Pounds
    • Item Dimensions: 4.9 x 5.0 x 3.7 inches
    • Condition: New
    • Fitment Type: Direct Replacement
    • SKU: 52495729
    • Warranty: This genuine part is guaranteed by GM's factory warranty.
    More Info
    Fits the following 2010 Chevrolet Impala Submodels:
    • 50th Anniversary Edition, LS, LT, LTZ, Police, SS | 6 Cyl 3.5 L FLEX, 6 Cyl 3.5 L GAS, 6 Cyl 3.9 L FLEX, 6 Cyl 3.9 L GAS, 8 Cyl 5.3 L GAS

2010 Chevrolet Impala A/C Expansion Valve

With a comprehensive array of OEM 2010 Chevrolet Impala A/C Expansion Valve, from fuel pumps to door handles, our website is a one-stop-shop for your needs. All our genuine 2010 Chevrolet Impala A/C Expansion Valve are backed by the manufacturer's warranty and are offered at competitive prices in the market. Rest assured, you can shop with complete confidence.

2010 Chevrolet Impala A/C Expansion Valve Parts and Q&A

  • Q: How to replace the A/C Expansion Valve on 2010 Chevrolet Impala?
    A: The first step to replace the A/C Expansion Valve involves recovering the refrigerant from the system. Disassemble by removing the Evaporator tube to A/C Expansion Valve (TXV) nut before subtracting the Evaporator outlet and inlet tubes connected to the txv. Washers from the Evaporator must be discarded before immediately applying caps or tape to both open inlet and outlet tubes to stop contamination. The procedure requires removal of the Evaporator bolts from the txv. After taking the txv out from the core, discard the sealing washers. Placing new sealing washers onto the Evaporator core should be followed by txv installation onto the Evaporator core. Screw in the txv to Evaporator bolts then tighten them to 7 nm (62 lb in). Place new sealing washers onto the Evaporator tubes while removing their caps or tape before installation of the Evaporator tubing cap. Secure the txv with the Evaporator outlet and inlet tube before running a torque specification of 17 nm (13 lb ft) for the Evaporator tube nut. The cylinder must undergo evacuation then recharge before conducting a leak test through j 39400-a-halogen leak detector on the fittings.

Related 2010 Chevrolet Impala Parts

Alternate Year Models

+
2009 Chevrolet Impala A/C Expansion Valve 2011 Chevrolet Impala A/C Expansion Valve